Search by property

Jump to: navigation, search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "TODO" with value "Add a spring loaded hold down to the left (anvil) side". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • 3D Printer - Full Spectrum Pegasus Touch  + ( * Sell machine )
  • Monarch Series 50 Model 16 Lathe  + ( * Thoroughly clean all surfaces ** Disman … * Thoroughly clean all surfaces ** Dismantle gearboxes? ** Evaporust! ** Relubricate * Pin crossfeed handle * Make cover for belt tensioner * Get/make new handle for disconnect * Replace power indicator lamp * Test all oiling tubes (after new pot) * Clean under threading gearbox cover * Exercise the power feed gear selector mechanism * Re-grease bearings for gearbox (left side) * Get (wishlist): ** Change gear for metric threading ** Collet chuck ** Taper attachment ** Steady rest ** QC tool holders that fit 1" bits ** magnetic parts trays rs that fit 1" bits ** magnetic parts trays )
  • DIY Lil' CNC  + ( * Tie into shop dust collector * Fix the acme rods so that they have a flat on the end that is connected to the shaft couplers. )
  • Drone CI  + ( * Use slack and slack blame into some channel for announcements of pipeline status * Better way to edit server-side configuration (instead of re-creating the containers) )
  • Dixie Narco Soda Machine  + ( * clean coin mech, and re-calibrate * fix cooling system (fixed?) )
  • 3D Printer - Formlabs Form2 MelodicTapir  + ( * make FAQ )
  • SawStop Table Saw  + ( * make cutting fixtures and storage for saw things )
  • Furnace: A Middle  + ( * needs thermostat * Turn towards lasers? * Had a label saying fan doesn't work, worked fine for us though. )
  • 3D Printer - Printrbot  + ( * replace broken/damaged frame pieces (Ne … * replace broken/damaged frame pieces (New parts are on the shelf next to the printerbot) * put all the parts back together and make sure it still works ==Fantasy WishList== * install Repetier Firmware * add a display and rotary encoder for standalone operation * build a Power Tower to hold PSU and spool * build a Power Tower to hold PSU and spool )
  • 3D Printer - Rostock MAX  + ( *Automated display of per-print cost. *Cooling fan design/build. )
  • 3D Printer - Stratasys  + ( *Bring in rack mount computer to run the machine. *Find a source for consumables. *Determine what the materials costs are. *Write up maintenance procedures. *Write up procedures for use. )
  • Laser Cutter - Wolverine  + ( *Develop a list of materials, with speed and power settings for various cutting depths. **[[pentest-report-1]] *Add bumpers under the lid. *Add stringer gas shocks so the lid does not slam shut. )
  • Singer 758 Sewing Machine  + ( *Machine power plug connection seems a bit flaky. *Only has 1 foot *zig-zag pattern disc is the only one included. *Need additional bobbins. )
  • 4x8 Utility Trailer  + ( *Put a sign on the trailer that indicates usage rules. *Mount the spare tire to the tongue. )
  • Laser Cutter - Chinesium  + ( *Put in new Bed *Rewrite Smoothieware - Why? Seems to work? *air assist solenoid *air assist nozzle *replace power switch with sonoff pow *add flow switch *add door interlock *add max endstops *better laser focus )
  • Hossfeld 2 Universal bender  + ( *Source more dies *Add a good pic to this page *Add the manual or a link to it *Maybe find some good videos and link them )
  • Laser Cutter - Full Spectrum  + ( *The focus slide could be redesigned for less flex. *Payment counter? *New roller design )
  • 3D Printer - Rostock MAX v3  + ( *Troubleshoot calibration issue, G29 command causes hang and code crash )
  • Nortel GPSTM  + ( *Use distribution amplifier to route 10Mh … *Use distribution amplifier to route 10Mhz/PPS to E-Room *Front panel VFD wiring/software *Integrate with [http://www.ntpsec.org ntpsec] *Mount antenna *48-hour site survey *Add PPS output from marked via. *Rackmount case survey</s> *<s>Add PPS output from marked via.</s> *<s>Rackmount case</s> )
  • Kenmore 1503 Sewing Machine (Willow)  + ( *get actual picture *finish model number *add maintenance info *Has Paul's mom been given a tax slip? )
  • CNC Plasma Cutter  + (1) Install permanent air drop for the mach … 1) Install permanent air drop for the machine, check air humidity/oil/etc. 2) Install permanent power for the CNC side of the machine 3) Clean out the water table 4) Seal water table leaks 5) Install limit switches (included with purchase, not currently installed) 6) Develop class content for training 7) Inventory consumables for the plasma cutter 8) Determine per-minute rate for using the machine 9) Put together instructions on swapping to the hand torch on the plasma cutter for hand work 10) Create signs for Down/Training/Etcrk 10) Create signs for Down/Training/Etc)
  • Powermatic Belt and Disc Sander (Model 30A)  + (1. <s>Add/enable dust collection sys … 1. Add/enable dust collection system for the machine. -- '''Done''' 2. Make a butterfly valve for the disc vacuum line. 3. Add disc and belt direction arrows. 4. Replace belt guard nuts with knobs for easier removal and replacement. 5. Replace missing and broken adjustment knobs. 6. Add miter gauge to disc sander bed. -- '''Done''' 7. Find at i3 or buy heat gun for changing sanding discs. -- '''Tool Crib'''at i3 or buy heat gun for changing sanding discs.</s> -- '''Tool Crib''')
  • Laser Cutter - Bumblebee  + (;New cylinders to hold different lenses, … ;New cylinders to hold different lenses, :...to make it easy and safe to change them without smudging or damage. Sector67 has indicated they may make some of these. (The existing cylinder has too narrow an opening for the lens that gives a long focal length. Its beam is so wide that it hits the lip and heats up the cylinder.) ;Payment-measuring timer. :One way to do this would be to measure current to the machine and time how long it runs at laser-firing power. It would be good to put a button on the timer that would re-set it to zero. :Another way, used at other spaces, is to use the "blow" output contact from the controller, which is meant to trigger the air-assist, in case bottled gas is being used for special cutting. ===Done=== ;Payment box. :Greg Smith made it. ;Laptop desk. :Standing desk built by [[user:Dustinbikes|Dustin White]] & Ted Hansen. ;Aperture in the chassis, through which to thread the blue USB cable with a grommet. :Instead, we discovered an exit under the machine and threaded it through that. [[user:Mattarnold|Matt Arnold]] used sugru on the side of the standing desk for a place to attach the end of the cable when unused.ce to attach the end of the cable when unused.)
  • Sceptre 55in 4K UHD TV  + (<s>*Upload, update main page picture … *Upload, update main page picture with the actual unit, preferably something displaying i3D logo on the screen. (desktop of Classroom PC or Chromecast?) *Update with where the remote is usually to be stored. (Acquire Velcro?) *Add a picture of the remote. *Perhaps make a wiki page for the ChromeCast?he remote.</s> *Perhaps make a wiki page for the ChromeCast?)
  • Tandem kayak  + (Add a couple pulleys so the gearbox is reachable from the floor.)
  • Husqvarna Designer 1 Sewing Machine  + (Add instructions Add picture Pay Paul for his mom Make a list of all accessories included)
  • Jet Drum Sander  + (Add outfield tables)
  • Fabric cutting table/mat  + (Add supports underneath for sewing machine weight Add bolt roller to hold fabric bolts (up to 60"W round and flat))
  • Embroidery Machine - Husqvarna Designer SE  + (Better documentation and investigation int … Better documentation and investigation into the design/execution toolchain--scheduled to be handled by the Coordinators. Coordinators: Regularly check bobbin cutting blade. Order new part from repair shop if damaged. Coordinators: Regularly check for nicks/scratches in needle plate. Sand out as necessary. Similarly, nicks in feet should be sanded lightly to reduce the burrs. Kevin: Rewrite maintenance page as maintenance + troubleshooting; add link to Husqvarna troubleshooting section of manual (http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_SE_Troubleshooting_EN.pdf). Anyone: List available hoop sizesN.pdf). Anyone: List available hoop sizes)
  • Dayton 24" Brake  + (Build a stand and bolt it to the floor)
  • Parts Washer  + (Buy Fluid, we used 5-10 gallons of purple power last time, research concentration needed and dilute to appropriate cleaning ratio. <br> Add a oil pan warmer to heat cleaning liquid.)
  • Mitre Saw  + (Buy a better one. Supplement with a cold saw.)
  • Acer 1440G Lathe  + (Center Tailstock)
  • Singer 111W153 Industrial Sewing Machine  + (Clean and setup)
  • ArtSign JSM-40U Laser Cutter  + (Controller needs fixing/replacement. Foof/Brian need a couple round tuits.)
  • Avid CNC  + (Essential stuff * Order pendant * Define authorization process and log-in procedures * Determine usage costs * Complete wiki page * Complete "Operation Checklist" Non-essential stuff * i3 Sign board on gantry)
  • Philips HeartStart OnSite AED  + (Expiration date is listed as December 2016.)
  • Re:load Pro  + (Find out how this works (See PDF link in "Documentation"))
  • Edlund Drill Press  + (Fix tensioner)
  • Singer 660 A202 Industrial Sewing Machine  + (Fix timing. August 2023)
  • Brother cs6000i sewing machine  + (Get a power cord as it's missing. buy: Bobbin (4) https://www.brother-usa.com/products/sa156 (One is on machine.) SA156 buy: Walking Foot SA140)
  • Kenmore Model 54 Sewing Machine (Violet)  + (Get new belt)
  • Lightbulb load-box  + (Grab a photo! Add a fan and intake/exhaust grilles?)
  • HAAS Training  + (Have fun with your new skill and make cool things.)
  • Badger Universal Model 360 Airbrush  + (I need to take more photos and post them along with a link or two to some sort of airbrush how-to. I've never used one myself, so until I've accessed that content and played around with the airbrush, this page will remain a stub.)
  • Walter's CNC Plasma Cutter  + (In the final stages of being set up. Tool chain still needs to be defined.)
  • Rhino CNC Lathe  + (It is currently out of the shop for a retrofit. the controller is being replaced to allow it to run from Mach 3.)
  • Babylock Evolve Serger  + (Jan to develop training program Make training kit Make machine dust cover Signage for cover Develop user fee structure)
  • RFID entry system  + (Known esp rfid bugs (not reported to esp r … Known esp rfid bugs (not reported to esp rfid because making test cases takes time) * a user badging in can scan as the previous user occasionally, so it says bad pin * doors crash a lot when reading the user list Next steps # remove mqtt opendoor functionality # write script to open door via websocket # more error handling/timeout in the setting script so we can automatically retry in the future Choices # medium term data source: make script to fetch from google, or update seltzer #* make a script that can automagically pull the spreadsheet, but this is a google permissions issue and I think the best way is to create an account that only has read access to the spreadsheet and use credentials from that and I've been lazy. #* Update CRM to replace slot with pin, and put all the keys back in the CRM.pin, and put all the keys back in the CRM.)
  • OpenEVSE  + (Maybe replace the i2c cable with something better. There are parts to build another one that has not been completed.)
Retrieved from "https://www.i3detroit.org/wiki/Special:SearchByProperty/cl:OlRPRE8vQWRkLTIwYS0yMHNwcmluZy0yMGxvYWRlZC0yMGhvbGQtMjBkb3duLTIwdG8tMjB0aGUtMjBsZWZ0LTIwKGFudmlsKS0yMHNpZGU"