GE EV Charger

GE EV Charger
Name	GE Wattstation EV Charger
Zone	Infrastructure
Owner	i3Detroit
Make Model	EVWSWBC
Part Number
Date Acquired	6/6/25
Storage Location
Authorization Required	No
Status	Running
Value
Power Requirements	240 VAC 40 Amps
Documentation	https://pdf.lowes.com/operatingguides/783164476248_oper.pdf?_gl=1*u4ca1z*_gcl_au*MTYzNjc3MjA0MC4xNzQ5NDE2NTY3
Other References

Intro

• Level 2 EVSE.
• Charges at 30 amps max.
• SAE J1772 plug.
  • NACS(Tesla) plug adapter below.

Rules

Be excellent about using the charger, put the plug away properly when done, avoid blocking EV charger access when not charging.

Instructions

ON/OFF Charger can be turned on by pressing in the On/Off pushbutton. When on, the LED ring around the connector will glow white. Charger can be turned off at any time by pressing the On/Off button again. The LED ring will turn off.

CONNECTING TO VEHICLE When the connector is seated in the charger holder, press and hold the button on the connector handle and pull away from the holder until it is fully removed. Press and hold the button on the connector handle and insert into the vehicle’s inlet socket. Release the button on the connector handle when fully connected to the vehicle inlet socket. Once the charger handle is connected to the vehicle, the charge status indicator will illuminate green.

DISCONNECTING FROM VEHICLE Charger can be disconnected from the vehicle at any time. Press and hold the button on top of the connector handle and pull the handle away from the vehicle inlet socket. The charge status indicator light will turn off. Replace the connector handle into the charger holder by pushing the connector into the inlet. This will ensure the connector is locked with the metal inlet of the charger holder.

FAQ

Q-The white ring is not illuminated and my car wont charge?

A-Check to see if charger is powered, via the white disconnect between the a side front door and garage door.

ToDo

Acquire replacement barrel lock with key for mounting hardware.