3D Printer - Stratasys
 |
This page contains historical information. It is provided for reference but does not reflect current information or policy. |
This page has been removed from search engines' indexes.
| 3D Printer - Stratasys | |
|---|---|
| |
| Name | Stratasys FDM 1650 3-D Printer |
| Zone | Fab Lab
|
| Owner | Brian Wennberg |
| Make Model | Stratsys FDM 1650 |
| Part Number | 1650 |
| Date Acquired | |
| Date Departed | NO DATE DEPARTED |
| Storage Location | |
| Authorization Required | No |
| Status | Departed |
| Value |
|
| Documentation | |
| Other References | Blog by a gentleman who took one apart and got it working again: My FDM 1650 Blog
Instructions for how to use it from Ball State University: Lab Procedure Blog entry about finding more material at a reasonable price (not): Material Madness Equipment page (like ours) from the London Hackerspace wiki: Equipment:Stratasys_FDM_1650 |
Intro
Rules
Instructions
Online manuals for an FDM 2000 which is very similar model:
*Applications *Utilities *Manual *Operations
Maintenance Info
- Preliminary
Z-stage Lubrication
Should be done monthly
Cable Lubrication
Should be done monthly
FDM Modeler Calibration
Should be done often - recommended minimum of once a week
FAQ
A list of commonly asked questions
ToDo
- Bring in rack mount computer to run the machine.
- Find a source for consumables.
- Determine what the materials costs are.
- Write up maintenance procedures.
- Write up procedures for use.
