Search by property
This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.
List of results
- Jet Jointer + (The jointer should be stored in the Wood Shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.)
- Jointer + (The jointer should be stored in the Wood Shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.)
- Vacuum Former + (The machine is on casters so it rolls around a lot. However, the vacuum former is stored in MESA.)
- Theater Lights + (The six installed lights are mounted on overhead pipes, above the commons table area.)
- Sanford Surface Grinder + (The surface grinder is installed in the south-west corner of the machine shop.)
- Brown and Sharpe Surface Grinder + (The surface grinder is installed in the south-west corner of the machine shop.)
- DoAll DBW-1 Bandsaw-Blade Welder + (The welder is installed on the south wall of the west end of the machine shop. These welders were usually installed inside the frame of a bandsaw, but this one was extracted from its bandsaw some time before it was brought to i3.)
- Delta 13 in Thickness Planer + (This Planer is located on a rolling cart in the Wood Shop.)
- Delta 4in Belt + 6in Disc Sander + (This belt + disc sander is no longer at i3.)
- Craftsman Belt+Disc Sander + (This belt+disc sander is located on a rolling cart in the Wood Shop.)
- Belt+Disc Sander + (This belt+disc sander was located on a rolling cart in the Wood Shop. It is no longer at i3 Detroit.)
- Milwaukee Panel Saw + (This item is located at the south end of the wood shop.)
- Rigid 16gal Wet-Dry Vac + (This item is stored in the wood shop.)
- Powermatic 14 inch Bandsaw + (This machine is located in the Woodshop)
- Powermatic Belt and Disc Sander + (This machine is located in the Woodshop)
- Jet 15 inch planer + (This machine is located in the Woodshop)
- DeWALT Mitersaw + (This mitersaw is located at the south end of the wood shop.)
- Powermatic Oscillating Spindle Sander + (This oscillating spindle sander is located on a rolling cart in the Wood Shop.)
- Skil Scroll Saw + (This scroll saw is located in the north end of the wood shop.)
- RoundOverBit Router Cart + (This specialized router setup is installed on a rolling cart in the Wood Shop.)
- Cyclonic Dust Collection System + (This system is located at the north end of the wood shop.)
- SawStop Table Saw + (This table saw is located in the Wood Shop)
- Walter's CNC Plasma Cutter + (To the left of the welding table.)
- 150lb Anvil + (Under the storage rack)
- Laser Cutter - Chinesium + (Under the table in the laser zone)
- National 474 Vending Machine + (Vending)
- Wireless LAN Controller + (Wall Mounted Rack)
- MQTT Space Map + (Wall near entrance)
- Weld Zone Light Button + (Weld zone wall near old light switch)
- Oxy-Acetylene Torch + (Welding Area, against the wall.)
- TIG Welder - P&H + (Welding Area, against the wall.)
- MIG Welder - Hobart RC250 + (Welding Area, against the wall.)
- CNC Plasma Cutter + (Welding Zone)
- Hobart Tigwave 250 AC/DC + (Welding Zone)
- Handheld Plasma Cutter + (Welding Zone Shelves)
- Solid Fuel Forge + (Welding area under rack)
- Fixed-base Reed Vise + (Welding bench)
- TIG Welder - Miller Dynasty 200 + (Welding zone, against the wall.)
- UV Cure toaster oven + (West Wall shelves)
- Dayton 24" Brake + (West end of Central bench)
- Kyocera 3050ci + (West of Fablab)
- Laser Cutter - Wolverine + (West wall, you can't miss it.)
- Husqvarna Viking Sewing Machine Emerald 116 + (Where is Viking.jpg)
- Wolverine PC + (Wolverine desk, mounted on the back of the monitor)
- CNC Router + (Wood Shop West Wall, next to Dust Collector)
- Hegner Scroll Saw + (Woodshop)
- Grinder/Sharpener + (Woodshop)
- Disco Ball + (above commons area)
- Chandeliers + (above commons area)
- 433 RF bridge + (above treehouse)
- Glass door + (at the end of the dooridor)
