Handheld Plasma Cutter
| Handheld Plasma Cutter | |
|---|---|
| |
| Name | Plasma Cutter - Handheld |
| Zone | Welding Area
|
| Owner | i3Detroit |
| Make Model | Spectrum 625 Xtreme |
| Part Number | |
| Date Acquired | 2015 |
| Storage Location | Welding Zone Shelves |
| Authorization Required | No |
| Status | Running |
| Value | 2100
|
| Documentation | * Owners Manual |
| Other References | |
Intro
Currently disconnected in favor of the CNC plasma table. To reconnect, make sure the CNC Plasma Power Supply is turned off, then unplug the 240v plug from above the plasma table. Plug the Miller Handheld Plasma into this, then connect the air drop to the back of the machine.
Rules
Instructions
If you do not know how to use this machine and need training, talk to:
Please do not use the machine if you are unsure of what you're doing. The consumables are not cheap and blowing out a shield and an electrode can cost $40 or more in damage in a very short amount of time.
Suggested Donation of $5/use for this machine to help pay for consumables.
Links:
https://www.millerwelds.com/resources/article-library/how-to-optimize-plasma-cutter-performance
https://www.thefabricator.com/article/cuttingweldprep/the-cutting-top-20
Maintenance Info
FAQ
ToDo