Woodshop Cutting Board 101 12-14-2024
Contents
Summary And Links
We're doing a Cutting Board 101 Class!
Will be held as two sessions
Saturday, 14 Dec 2024 & Sunday, 15 Dec 2024
3:00-6:00 PM (15.00-18.00 EST). May finish sooner on 2nd day.
Eventbrite Registration Link:
Forthcoming
Prework
Go to this URL https://www.cuttingboarddesigner.com/designer/id/ddcfa0d5-7c2c-42d1-82eb-a3448a514752
This is the design we'll be making. You can customize your own board subject to the following constraints:
- Woods available to class: Hard Maple, Cherry, Walnut, Padauk, Purpleheart
- In order to keep the cost of the class reasonable, you should use a minimum of 6 inches of either Maple or Cherry, and you can use other woods for the remaining 4.5 inches
- Also for cost (and time), keep board width to 10.5 inches
- Our boards will be about 3/4 inches thick
- If you wish to have a profile on the edge with a router, do NOT use purpleheart or padauk on the end and do not use a 0.5 inch strip as the profile will eat into that
- In order to keep class moving at a steady speed, we'll only be using widths of 0.5, 1.0, and 1.5 inches or more. Consider using a single piece of Maple or Cherry that is 3-5.5 inches wide to show the grain, see examples below
For example, here are other permissible designs
https://www.cuttingboarddesigner.com/designer/id/8c539510-7f74-4ef0-b710-6ef56e976726
https://www.cuttingboarddesigner.com/designer/id/208d9b11-a2f3-40ce-a9d0-fb88059dc613
https://www.cuttingboarddesigner.com/designer/id/247df9a8-3b76-40a9-8aad-a645dfbf8e29
Use your artistic freedom! Given that we'll create a profile around the perimeter, you may choose to use thicker strips on the edge.
The web page wood cost is not reflective of the cost we pay as hardwood has become quite expensive. There is also quite a bit of waste when creating unique boards. Other cutting board classes in the metro area are $120+.
Class Notes
Class fee is $55. You will go home with a cutting board made by you! Impress your future dinner party guests with your charcuterie board which you designed and made from scratch. If cared for properly, these boards can last a very long time
Tools List
Tools used in the class, in order
- Jointer (Instructor only for 101 class, ahead of class)
- Planar
- Table saw
- Clamps
- Planar
- Orbital Sander
- Router (optional, will be done by instructor for those not familiar with routing)
Table saw operation will be guided closely.
Caring for your board
- Do not ever use inside dishwasher
- Do not let it soak in water
- Find cutting board oil, commonly available at home box stores and online, and re-apply every few weeks
Materials List
The materials below are all based on a class size of 4 and will be provided by instructor
We'll need:
- Glue-up Jigs and/or clamps
- Wood: Mix of domestic and exotic
- Glue: Titebond III
- Foam brushes for applying glue
- Disposable towels to clean-up excess glue
- Cutting board oil
Example boards from previous classes
The following pictures showcase examples from previous classes along with types of wood used. Maple is the lightest color, followed by cherry. Walnut is a light brown. Padauk is a deeper brown with a reddish tint. Purpleheart is difficult to see in these pictures but can be found elsewhere on the web.
Note: Purpleheart turns brown after cutting but returns to purple after a couple of days
