Search by property

Jump to: navigation, search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "TODO" with value "Need to have controller built". Since there have been only a few results, also nearby values are displayed.

Showing below up to 26 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

  • Fabric cutting table/mat  + (Add supports underneath for sewing machine weight Add bolt roller to hold fabric bolts (up to 60"W round and flat))
  • Embroidery Machine - Husqvarna Designer SE  + (Better documentation and investigation int … Better documentation and investigation into the design/execution toolchain--scheduled to be handled by the Coordinators. Coordinators: Regularly check bobbin cutting blade. Order new part from repair shop if damaged. Coordinators: Regularly check for nicks/scratches in needle plate. Sand out as necessary. Similarly, nicks in feet should be sanded lightly to reduce the burrs. Kevin: Rewrite maintenance page as maintenance + troubleshooting; add link to Husqvarna troubleshooting section of manual (http://www.husqvarnaviking.com/SiteMedia/Products/Machines/Support/Designer_SE_Troubleshooting_EN.pdf). Anyone: List available hoop sizesN.pdf). Anyone: List available hoop sizes)
  • Dayton 24" Brake  + (Build a stand and bolt it to the floor)
  • Parts Washer  + (Buy Fluid, we used 5-10 gallons of purple power last time, research concentration needed and dilute to appropriate cleaning ratio. <br> Add a oil pan warmer to heat cleaning liquid.)
  • Mitre Saw  + (Buy a better one. Supplement with a cold saw.)
  • Acer 1440G Lathe  + (Center Tailstock)
  • Singer 111W153 Industrial Sewing Machine  + (Clean and setup)
  • ArtSign JSM-40U Laser Cutter  + (Controller needs fixing/replacement. Foof/Brian need a couple round tuits.)
  • Avid CNC  + (Essential stuff * Order pendant * Define authorization process and log-in procedures * Determine usage costs * Complete wiki page * Complete "Operation Checklist" Non-essential stuff * i3 Sign board on gantry)
  • Philips HeartStart OnSite AED  + (Expiration date is listed as December 2016.)
  • Re:load Pro  + (Find out how this works (See PDF link in "Documentation"))
  • Edlund Drill Press  + (Fix tensioner)
  • Singer 660 A202 Industrial Sewing Machine  + (Fix timing. August 2023)
  • Brother cs6000i sewing machine  + (Get a power cord as it's missing. buy: Bobbin (4) https://www.brother-usa.com/products/sa156 (One is on machine.) SA156 buy: Walking Foot SA140)
  • Kenmore Model 54 Sewing Machine (Violet)  + (Get new belt)
  • Lightbulb load-box  + (Grab a photo! Add a fan and intake/exhaust grilles?)
  • HAAS Training  + (Have fun with your new skill and make cool things.)
  • Badger Universal Model 360 Airbrush  + (I need to take more photos and post them along with a link or two to some sort of airbrush how-to. I've never used one myself, so until I've accessed that content and played around with the airbrush, this page will remain a stub.)
  • Walter's CNC Plasma Cutter  + (In the final stages of being set up. Tool chain still needs to be defined.)
  • Rhino CNC Lathe  + (It is currently out of the shop for a retrofit. the controller is being replaced to allow it to run from Mach 3.)
  • Babylock Evolve Serger  + (Jan to develop training program Make training kit Make machine dust cover Signage for cover Develop user fee structure)
  • RFID entry system  + (Known esp rfid bugs (not reported to esp r … Known esp rfid bugs (not reported to esp rfid because making test cases takes time) * a user badging in can scan as the previous user occasionally, so it says bad pin * doors crash a lot when reading the user list Next steps # remove mqtt opendoor functionality # write script to open door via websocket # more error handling/timeout in the setting script so we can automatically retry in the future Choices # medium term data source: make script to fetch from google, or update seltzer #* make a script that can automagically pull the spreadsheet, but this is a google permissions issue and I think the best way is to create an account that only has read access to the spreadsheet and use credentials from that and I've been lazy. #* Update CRM to replace slot with pin, and put all the keys back in the CRM.pin, and put all the keys back in the CRM.)
  • OpenEVSE  + (Maybe replace the i2c cable with something better. There are parts to build another one that has not been completed.)
  • Husqvarna Viking Sewing Machine Emerald 116  + (Missing parts were purchased so machine could be used and have been tested. No other tasks due at this time.)
  • Tacsew T175 Blindstitch Machine  + (Need spool pin)
  • DesignJet t1100ps  + (Needs a fitted cover, at some point. How-to list for printing patterns and posters on the roll paper at full size.)
  • Juki DDL-5550N-7 Industrial Sewing Machine  + (New bobbin winder. Install manual knee lift to replace defective servo.)
  • 3Doodler  + (None.)
  • Hot Steam gravity fed iron  + (Perform monthly checks and maintenance.)
  • Furnace: A North  + (Presently powered from the row-2 light circuit. Fix that?)
  • PCB Mill  + (Procure a full set of the mill, routers, and drills. '''Restore spindle motor driver board to functionality''')
  • X-Tronic 4000 Hot Air Rework Station  + (Pump is broken)
  • Baby Lock Imagine Serger  + (Replace machine.)
  • Welding Table  + (Replace with a proper layout table and a f … Replace with a proper layout table and a flat welding table w/ threaded anchor holes. Maybe a downdraft table too. 4x8 for the layout table, a couple of 4x4 welding tables that can be clamped together, 3x4 for the downdraft, ideally 3 of them, each with their own set of practice welders.ch with their own set of practice welders.)
  • Scotsew Industrial Sewing Machine  + (Set up and get working once the sewing room is built.)
  • Kyocera 4551ci  + (Set up and get working.)
  • Dishwasher  + (Set up and get working.)
  • SewingTableWithPowerLift  + (Set up and get working.)
  • Kenmore Dyemaster 2000  + (Setup and get running. Looks like a washing machine.)
  • Embroidery Machine - Husqvarna Diamond Deluxe  + (Signage for hard cover)
  • Tent  + (Some of the bent pieces could be replaced. Probably could use a good wash.)
  • Singer 1507  + (Someone who knows how to use the Singer should update this page with instructions, or at least a more accurate and useful description.)
  • Salt Godbox  + (Tasks: * UPGRADE SALT ** [[User:AstraLuma|Jamie Bliss]] … Tasks: * UPGRADE SALT ** [[User:AstraLuma|Jamie Bliss]]: Fix SpiroFS * change hypervisor on [[hardac]]? * Wireguard? ** Use [[skynet]] as endpoint ** Web VM <-> space permanent link ** member VPN instead of L2TP? * Monitoring VM ** Grafana ** Telegraf ** SNMP ** syslog server ** logtail ** Maybe repurpose [[mcclellan]] * So many docs * Actually train a few other people on how to use the systemrain a few other people on how to use the system)
  • Mini vacuum with micro attachments  + (The pieces are small. Keeping them in their box when done, will help us to not lose them.)
  • Pallet Jack  + (Use)
  • Creality CR30 Belt Printer  + (User guide, instructions, TBD)
  • Tektronix TDS460 Digital Oscilloscope  + (What problems does this thing have, or are there improvements that would make it better.)
  • Black & Decker "Steam XPress" Iron  + (When we get a working camera again, a picture would be nice...)
  • APC Smart-UPS 3000VA  + (Why does plugging a serial to usb thing into the serial port cause it to turn off. That is sub optimal.)
  • Genie  + (Yet to do, short term: *Coat battery termi … Yet to do, short term: *Coat battery terminals generously with anticorrosive. *Replace the base-run switch. Wishlist, long term: *Diagnose and repair the platform-power connection. *Redo the vinyl lettering on the machine panels and sides. *Remove, sandblast, repaint, and reinstall the battery bays. *Ammeter for charging/discharging current?*Ammeter for charging/discharging current?)
Retrieved from "https://www.i3detroit.org/wiki/Special:SearchByProperty/cl:OlRPRE8vTmVlZC0yMHRvLTIwaGF2ZS0yMGNvbnRyb2xsZXItMjBidWlsdA"