Search by property

Jump to: navigation, search

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

Search by property

A list of all pages that have property "TODO" with value " * Actually install printer in space. ". Since there have been only a few results, also nearby values are displayed.

Showing below up to 37 results starting with #1.

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)

    

List of results

    • IoT Kiosk  + ( * Add touchscreen capabilities )
    • Dayton Pallet Stacker  + ( * Adjust the wheel-lock brakes so both work. Presently only the left one works well. )
    • Jet Drill Press  + ( * Build Cabinet for Drill Press tools and accessories )
    • MQTT Space Map  + ( * Build a prettier version once we're done adding things * Add tool crib H lights to the map, maybe move the other light as we physically moved it )
    • DoAll DBW-1 Bandsaw-Blade Welder  + ( * Continue welding trials with bi-metal blade )
    • MIG Welder - Hobart RC250  + ( * Find replacement for current adjustment rheostat. Range is too touchy, )
    • Laser Cutter - Cyclops  + ( * Get a honeycomb that we can set on the cutting table. * Get a handle on the metal cutting mode. )
    • 3D Printer - Prusa MK3S/MMU2S  + ( * Light bar: ** Needs to be connected to … * Light bar: ** Needs to be connected to relay, then powered from the 24VDC machine power supply. ** Relay needs to be connected to Raspberry Pi I/O for the OctoPrint Environment plugin to control * Credentials for OctoPrint and Pi need to be put onto machine physically,. and/or shared with [[User:Agmlego|Amelia Meyer]] * MMU2S filament spools need a better holder. Maybe something like a retracting winder? . Maybe something like a retracting winder? )
    • Ceramics Kiln - Evenheat 5320  + ( * Make Controller for Automated Temperatu … * Make Controller for Automated Temperature Control ===How to Plug in the Large Ceramic Kiln=== 1) The kiln you wish to use probably has this type of plug pattern in the end of the cord (Type 2). [[File:Plug2.JPG|400px]] The sockets on the wall have this type of pattern (Type 1) [[File:Socket1.JPG|400px]] So we have built an extension cord with a Built In Adapter. Socket for Type 2 leading to plug of Type 1. Plug the kiln into this extension cord. There are 2 places to plug in the Type 1 plug of the extension cord. The socket on the East wall of the Kiln Zone and the Switch Box on the fence on the South side of the zone. If you are using the KilnSitter, then plug the extension cord directly into the wall. If you are using the computer, plug the extension cord into the Switch Box. =Historical Information Below - Not Current = ==How to Program the Kiln Controller== Ver 1.0 by Terry W. Step 1) Turn ON controller with Green button. You should see the current temp in PV display. Step 2) Push the SET button. You should see PASS in the PV display and 0000 in the SV display. Step 3) Our convention will be > for the rightward arrow button, ^ for the upward and v for the downward, since I can't type that one. Use >, ^, and v to type in 2000 and hit SET. Firing Schedules. You will see in books on glass, things called firing schedules. They look like this: You read that as a set of instructions: Ramp up the temperature from room temp to 1250F at a rate of 300F per hour. THEN hold 1250F for 30 minutes. THEN ramp from there to 1420F at a rate of 300F per hour. THEN hold it for 30-60 minutes. THEN ramp as fast as you can from there to 960F THEN hold it for 90 minutes THEN ramp at 50F/hr to 800F SKIP holding it. THEN ramp at 100F/hr to 600F THEN turn it OFF and don't open the kiln until Room Temp (No Venting). Your Kiln Controller needs to be programmed in a series of steps. Each steps has 3 attributes, C,T,Sv. So your list of instructions will look like C1,T1,Sv1 C2,T2,Sv2 C3,T3,Sv3gnore formatting . . . Let me define what each of those are. C is the PID setting we use. We always use PID#1, which I have preprogrammed into the controller. Please do NOT change PID#1. T is time, in minutes. More later. Sv is a target temperature in F. I believe Sv is short for “Set Value”. And Pv is Present Value....of what you are trying to control, in our case Temp F. So from our example C1=0001, T1, Sv1=0070 (room temp) C2=0001, T2, Sv2=1250 Now Let me explain what T is. T1 is supposed to be the time (in minutes) we are telling the controller to get from Sv1 to Sv2. So our programming looks like this: C1=0001, T1=240, Sv1=0070 (room temp) C2=0001, T2=30, Sv2=1250 C3=0001, T3= 60 , Sv3=1250 . . . Note that I am rounding to the nearest half hour because kiln work isn't that fussy ...until you get to Pate de Verre, which is not covered in this lesson. Once you have put in all steps, scroll up to END and hit SET. This enters your program. The controller will keep it, even if switched off. Once programmed, you can 1) Make sure the Thermocouple (yellow plug) is plugged into the yellow socket (check polarity). 2) Make sure the data signal (blue cat5e wire) is plugged into the Controller and the Relay Box. 3) Make sure the Relay box is plugged into the wall and the circuit breaker is set to ON. 4) Roll the cart OUT of the cage. 5) Make sure the top of the kiln is plugged into the bottom. 6) Make sure algnore formattingl 3 knobs are set to 10 (or to 11 if you are a Spinal Tap fan). 7) Make sure the Kiln is plugged into the Relay Box. 8) Turn on the Controller with the Green Switch. 9) Hit the > key. == Troubleshooting Controller == '''1) Within 3 seconds of turning controller ON duty cycle goes to 100% and Sv reads LARGE value.''' Your T1 should be set to room temp or slightly below. If set to HIGH VALUE controller will immediately strive to take kiln UP to HIGH VALUE with 100% duty cycle. == Table of Equipment Ownership== Not sure what this is trying to do but it's very broke and is preventing editing [[User:Mtfurlan|Mtfurlan]] ([[User talk:Mtfurlan|talk]]) 21:38, 23 July 2020 (EDT) '"`UNIQ--pre-00000000-QINU`"' * Relay Box/Programmable Controller 1 (i3) * Web-based Programmable Controller 2 (i3) * Several Glass Casting Mold (TW) * Several Slumping Molds (i3) * All Kiln Furniture (i3) == Consumables(i3 owned) == Boron Nitride Various Grits Kiln Paper == Kiln Store == TBD == Tools == Furniture Brush Mask Scale Gloves Pyrometer gnore formatting Kiln Sitter (Not Installed) Rolling Rack Kiln Furniture Slumping Molds == Coordinator's Report == July 1, 2013 - About 25 people have taken Kiln Training and are authorized to run the kiln solo. We have about 10 public casting molds of various shapes. These are on loan. There are about 3 dozen Glass Frit colors. These are owned by i3. We will start a cash box soon for their use. Each small jar costs about 8 dollars, so the costs will be prorated, probably like $2 per casting, including Boron Nitride use. If your glass sticks in a mold, I now know new ways of recovery, please email me. Remember we have Standardized on COE 96. Please contact me if you are going to use a non-standard COE. Remember to change the kiln paper about once every 2-4 firings. Change it carefully because it gets powdery when used up. We are petitioning the Membership in the July meeting to extend the fence by about 3 feet to accomodate Kiln 2. With the addition, Kiln 2 is planned to be operational in Sept. As of July 1, all items in the Kiln Zone which have not been ID'd and inventoried on this page as belonging to a member and on loan, will be ID'd and inventoried as belonging to i3. See me before July 15 if this presents any problems. As of July 1, we should have all items in the KZ with either a Donation Log entry or a Loaner Form on file with the Board and me. Damage lower wall and heating element, left side of kiln1. Reset brick for temporary fix. Should be good for July. Need to get HEPA shopvac for removal of Kiln Paper. Future Plans: * Extend Fence * Kiln 2 operational * HEPA shop vac * Cash Box * HEPA spray table * 2nd Rolling Wire Cart * Kiln Tray w/Leveling * Sheet Glass Storage Expense Report (i3 Funds) Q4 2012, $150 (fencing) Q1 2013, $0 Q2 2013, $0 June, 2013 $0 -END JULY 2013- '''August 1, 2013''' This report will have all info that happened after July 1, but on or before Aug 1, 2013. I will accumulate information as the month goes and present the report in the first Member Meeting of August. Kiln lower wall has some damage. Kiln good to go, but eventually will need maintenance. Thermocouple had problem. Replaced same. Need to add time lapse camera to check if the kiln cycle is operating as expected over a day's worth of pictures. -END AUGUST 2013- Kiln Zone Expansion is 1/2 complete. Waiting for parts shipment. Expected completion date 9/30. Kiln #1 is fully operational. Kiln #2 will go ONLINE in October '13. -END SEPT 2013- n #2 will go ONLINE in October '13. -END SEPT 2013- )
    • Ceramics Kiln - Evenheat 4320  + ( * Make Controller for Automated Temperature Control )
    • Infocus Projector  + ( * Make a permanent home for the remote control * Route VGA/Composite cables from the projector down behind the screen to the audio hookup location * Add an HDMI adapter and chromecast )
    • Male mannequin (Leonardo Decapitated)  + ( * Make him some clothes so he's not so cold )
    • LR Mate 200iC Industrial Robot  + ( * Move the controller to the bottom of the cart * Cable routing & cleanup )
    • Furnace: B North  + ( * Needs new motor ** Dayton 3M588A *** 1 … * Needs new motor ** Dayton 3M588A *** 1/15 HP *** 1050 RPM *** Frame 42Y ** https://www.grainger.com/category/motors/ac-motors/hvac-ac-motors/direct-drive-blower-hvac-ac-motors?attrs=Frame%7C42Y~~HP%7C1%2F15~~No.+of+Speeds%7C1~~RPM+Range%7C1%2C001-1%2C100&filters=attrs * Needs new bottom sheetmetal * New Thermostat * Needs new bottom sheetmetal * New Thermostat )
    • Furnace: B Mid  + ( * New Thermostat )
    • CNC Router  + ( * Officially approve this equipment to live in the CNC zone * Populate this wiki page with useful information )
    • Snack Shop Vending Machine  + ( * Paint the vending machine (It is currently primed from a long ago attempt at painting) )
    • Furnace: A South  + ( * Pilot light won't stay lit, replace thermocouple * Needs thermostat * turn towards commons? )
    • Vacuum Former  + ( * Please create list of materials that can be used, with suggested suppliers * Basic tutorial & instructions would be helpful )
    • Convection Oven  + ( * Plumb in vent ducting after AC blast gate )
    • 3D Printer - Hacker H2  + ( * Printer fell and has trouble calibrating, diagnosis unknown. * Replace hotend ([[User:Aurekana|Paul Frick]]) * Fix extruder thermal decoupling error * Spool holder? )
    • Furnace: B South  + ( * Replace switch box on furnace * new thermostat )
    • Sandblaster  + ( * Reseal everything! * Run air line drop from above. )
    • 3D Printer - Full Spectrum Pegasus Touch  + ( * Sell machine )
    • Monarch Series 50 Model 16 Lathe  + ( * Thoroughly clean all surfaces ** Disman … * Thoroughly clean all surfaces ** Dismantle gearboxes? ** Evaporust! ** Relubricate * Pin crossfeed handle * Make cover for belt tensioner * Get/make new handle for disconnect * Replace power indicator lamp * Test all oiling tubes (after new pot) * Clean under threading gearbox cover * Exercise the power feed gear selector mechanism * Re-grease bearings for gearbox (left side) * Get (wishlist): ** Change gear for metric threading ** Collet chuck ** Taper attachment ** Steady rest ** QC tool holders that fit 1" bits ** magnetic parts trays rs that fit 1" bits ** magnetic parts trays )
    • DIY Lil' CNC  + ( * Tie into shop dust collector * Fix the acme rods so that they have a flat on the end that is connected to the shaft couplers. )
    • Drone CI  + ( * Use slack and slack blame into some channel for announcements of pipeline status * Better way to edit server-side configuration (instead of re-creating the containers) )
    • Dixie Narco Soda Machine  + ( * clean coin mech, and re-calibrate * fix cooling system (fixed?) )
    • 3D Printer - Formlabs Form2 MelodicTapir  + ( * make FAQ )
    • SawStop Table Saw  + ( * make cutting fixtures and storage for saw things )
    • Furnace: A Middle  + ( * needs thermostat * Turn towards lasers? * Had a label saying fan doesn't work, worked fine for us though. )
    • 3D Printer - Printrbot  + ( * replace broken/damaged frame pieces (Ne … * replace broken/damaged frame pieces (New parts are on the shelf next to the printerbot) * put all the parts back together and make sure it still works ==Fantasy WishList== * install Repetier Firmware * add a display and rotary encoder for standalone operation * build a Power Tower to hold PSU and spool * build a Power Tower to hold PSU and spool )
    • 3D Printer - Rostock MAX  + ( *Automated display of per-print cost. *Cooling fan design/build. )
    • 3D Printer - Stratasys  + ( *Bring in rack mount computer to run the machine. *Find a source for consumables. *Determine what the materials costs are. *Write up maintenance procedures. *Write up procedures for use. )
    • Laser Cutter - Wolverine  + ( *Develop a list of materials, with speed and power settings for various cutting depths. **[[pentest-report-1]] *Add bumpers under the lid. *Add stringer gas shocks so the lid does not slam shut. )
    • Singer 758 Sewing Machine  + ( *Machine power plug connection seems a bit flaky. *Only has 1 foot *zig-zag pattern disc is the only one included. *Need additional bobbins. )
    Retrieved from "https://www.i3detroit.org/wiki/Special:SearchByProperty/cl:OlRPRE8vKi0yMEFjdHVhbGx5LTIwaW5zdGFsbC0yMHByaW50ZXItMjBpbi0yMHNwYWNlLg"