Roof Vent Above Sewing
| Roof Vent Above Sewing | |
|---|---|
| |
| Name | Vent above Sewing |
| Zone | Infrastructure
|
| Owner | i3Detroit |
| Make Model | Sonoff TH16 (modified) |
| Part Number | |
| Date Acquired | 2017-11 |
| Storage Location | in the hallway outside the sewing zone |
| Authorization Required | No |
| Status | Running |
| Value | $300 |
| IP Address | 10.13.107.132 |
| MAC Address | 2C:3A:E8:08:03:AF |
| Hostname | cnc-vent |
| Documentation | https://github.com/arendst/Sonoff-Tasmota/wiki |
| Other References | |
Intro
Rules
Instructions
Maintenance Info
If uploading new software to this it needs three commands to be fully functional:
gpio4 9
gpio14 29
switchmode 3
I also had to make some hardware modifications (pictured) based on information from here
FAQ
ToDo
IOT device died as it got wet from rain. Module bypassed and can be turned on or off with the breaker in the A side NW corner.
