PotLock 2020-01-18: The Calm Before the Storm Edition Tasklist
Contents
PotLock: The Calm Before Amidst the Storm Edition (January 18, 2020) Tasklists
Tasklists
Spacewide Stuff
- Take new pictures for
- Equipment pages
 - https://wiki.hackerspaces.org/I3Detroit
 - Please remember that if you're taking pictures that include people you need their consent
 
 - Try to inventory mezzanines and update https://www.i3detroit.org/wiki/Long_Term_Storage
 - Print out Equipment Labels List and apply to equipment
 
pages.
- Genie
- Check battery fluid level. If the battery water is low, top off with distilled only, preferably from a freshly opened jug.
 - If you’re really bored, lube the column and/or change the hydraulic fluid.
 
 - Stuff Stuff
- Insure parking permits and tickets are stocked up.
 - Apply as needed to stuff left out in the space.
 - Clean up lost and found
 - E-Waste from Graveyard to Silicon Alley
 
 
B-Side (Commons)
Tasks
- Add foam to the wall air conditioner so it leaks less heat
 - Painting!
 - Cut foam for ceiling vent(s)
 
Supplies Needed
Classroom/Friendly Bathroom
Tasks
- Finish painting crown molding
 - Touch up walls (patch holes/paint over)
 - Improve ceiling
- Fix collapsing panels
 
 - Weatherstrip door
 - Move caddy from bunk couch to south-east wall (ask Jan)
 - Turn zone signage into vinyl (T. Drury?)
 - Finish painting hallway
 - Scrub floor/base molding
 - Add catch tray under soap dispenser in bathroom
 
Supplies Needed
Laser Zone
- Vacuum out the bottoms of the laser cabinets
 - Clean air filters on chillers
 - Check water levels in chillers
 - Re-hang examples on the wall
 
Machine Shop
Tasks
- install new surface grinder
 - sort out drill bits and taps
 - sort out contents under the work benches
 - foam the hole in the center back wall (used to be a fan)
 - investigate blown capacitor(?) in vent motor
 
Supplies Needed
- foam sheet for wall, not terribly thick, about 18" square (or tufts of fiberglass or cotton insulation)
 
Tool Crib
- Paint Powertools
 - If anyone wants to sort existing fasteners that would be cool but I'm not going to do it. Mtfurlan (talk)
 
Welding Zone
Tasks
- Clean
- Move stuff and sweep. Be careful not to kick up dust, just gather it up gently.
 - Use floor compound if you want.
 
 
- Organize
- The shelves - Take stuff off, wipe off the dust, put back with some semblance of order.
 - The scrap - Separate into magnetic and non-magnetic. Throw out stuff that looks too grungy to be of use (scrap bins in Machine Shop).
 - DEAL WITH THE AUCTION SCRAP!
 - Make sure the fire extinguisher is accessible...
 
 
Media Lab
Tasks
- Clean printers area
 - Assess ink and print media supplies, order new stuff as necessary.
 - Make a mobile media cart with mixer, mics, power, area for laptop and tower, screen mount, speakers.
 - clean/organize media lab, move rarely used items to media lab’s new overflow storage plot.
 - further research items to be purchased that were listed on 2020 media lab budget; VR ready workstation, camera, etc.
 
eLab
Tasks
- Vacuum floor
 - Sweep and wipe off benches
 
Infrastructure
Tasks
- set exterior lights on B side to be on at night