The SSID is i3detroit, with no encryption. There is also an SSID of i3detroit-wpa with encryption; the passphrase is on posters with QR codes scattered about the space.

There is also a i3detroit-iot SSID for IoT devices; ask Amelia Meyer for connection details if you need to get a device on this.

Internally, we are using the 10.13.0.0/16 supernet. It should sidestep most VPN overlap problems, should we establish any connections to other locations. At present, we are using three subnets of this:

If you have something that needs to be attached to the network at i3Detroit, a static IP address can be assigned to it. This is useful in cases where something like a printer or a tool needs to be on the network with a known address that doesn't change.

Most member and guest laptops, however, do not need one of these.

If you have something that needs a fixed address but can't be configured for one (for some reason), something known as a DHCP reservation can be applied. Please contact Amelia Meyer to help you out with this.

If you can, please try to create a wiki page with information about the thing you just attached to the network, and link to that from the IP address listing here.

The default DNS domain handed out for DHCP clients is i3detroit.local. If you have statically assigned a IP to something, and you want its hostname to be in DNS as your_hostname.i3detroit.local, we can add it to the local server. Post a request on the mailing list to have that taken care of.

This is the page that contains the only authoritative list of what the connections on the networking patch panel go to.

This subnet is for networking devices only, like access points and switches. See A-Side Network Switches and B-Side Network Switch.

The DHCP range handed out by the firewall is 10.13.0.100-10.13.3.254, reservations are possible.

Use the Equipment Page Form to add devices to this list or move items from the old non-Semantic list below.

This subnet is for IoT devices only, and is routed only on VLAN 107 and the IoT SSID. The DHCP range is 10.13.107.10-10.13.107.254. Do not change the ports of any wired devices on this subnet.

This subnet is for security cameras only, and is routed only on VLAN 201. The DHCP range is 10.13.201.10-10.13.201.254. Do not change the ports of any wired devices on this subnet.