LaserCut

From i3Detroit
Jump to: navigation, search

LaserCut 5.3 is the software that Bumblebee and Wolverine use to convert 2D layouts to an MOL file that can be read by the laser cutter The user can either do simple layouts directly in this software, or import layouts / drawings that were made in other software such as Adobe Illustrator, Inkscape, AutoCAD, etc.

Laser Cut 5.3 Video's on Youtube: link LaserCut 5.3 Software Tutorial

LaserCut is installed on the Laser cutter laptop, which lives on the desk next to bumblebee. One way to get your files to the laser cutter is to bring a flashdrive or download your files off of dropbox, etc and use LaserCut on the laptop to export the MOL files to the laser cutter. However, you can also now set up LaserCut on your personal laptop, which means you can get everything set up while hanging out in the commons area (or at home if you plan ahead) and then pop over to the laser only when you're totally ready.

Setting up the software on your personal laptop

This is an advanced step is and is not recommended until you're familiar with the software. Make sure you replace the default syscfg.ini with the appropriate one from the section below, LaserCut#LaserCut System Configurations

  1. Download and install both the LaserCut5.3 software and the driver for the laser cutter itself
    • The software and 64-bit drivers can also be found here or on the manufacturer's site
    • The original CD that came with the laser cutter is in the plastic bin on the shelves by the machine. However, the software on the CD only supports XP machines.
    • The manufacturer's website does not list the correct drivers anymore.
  2. Before running Lasercut for the first time, you'll need the "soft dog" AKA USB dongle. The dongle lives in the USB port on the right side of the laser cutter laptop. Remember to return the dongle to the laptop
  3. Plug in the dongle and open LaserCut. Once LaserCut is open on your computer, you can remove the dongle and keep working. However, you do need the dongle to export files to the laser cutter.
  4. Hook up the laser when you're ready. The USB cord that connects to the laser cutter itself also lives in a USB port on the right side of the laser cutter laptop. Just plug it in you're good to go. You may need to restart LaserCut to get the software to see the laser cutter.

Importing vector graphic files

  1. File -> New to open a new design
  2. File -> Import to browse for your vector graphic file ( .ai, .dxf, etc)
    • Make sure that the "PreView" box is checked and that you can see a preview of your art. If you can't and you're opening an AI file, make sure when saving in Illustrator that "Use compression" is un-checked.
  3. Double check the units of your file once it's imported. The laser cutter bed shown in the software is in cm. Importing DXF files from Inkscape sometimes gives screwy units.

Basic design set-up

  1. Clean up your tool paths
    Select all the paths in your design, Go to Tools -> Unite Lines. The default tolerance is OK. The idea is to make each path one cut to save time. It will also fix any gaps in your tool paths. LaserCut will show arrowheads on each cut-see picture below.
    Unite Lines.PNG
  2. Choose your origin.
    Go to Laser -> Set Laser Origin. It doesn't matter where your origin is, as long as you know where it is so you can set the head in the right position relative to your material. The origin will show up as a little blue box. Make sure you double check this before hitting test so the laser head doesn't run into anything.
  3. Set up your cut & engrave layers
    • The color of the cut lines corresponds to their layer.
    • When your design is imported, everything will be highlighted red. Click somewhere in empty space to un-select everything to see the real color.
    • Select a path by clicking on it, and then choose a color from the bottom row. All active colors will show up in the Layers window on the right side of the screen, as shown below.
    • The order of the layers in the Layers Window is the order that they will be executed. A good rule of thumb is to move all the engrave layers to the top of the list (select the color next to the layer and hit the "UP" button below the layers list) so that if the materials pops out of place a little from cutting, the engrave will already be done
      LaserCut Layers.PNG
  4. Set the power & speed settings for each layer by double-clicking the layer.
    • See the Materials List for recommended power & speed settings but ALWAYS test your material first to avoid wasting material and time on the laser

Send your file to the laser cutter

  1. Plug in both the dongle and the laser cutter's USB cord.
  2. Save your file in LaserCut. Important: File names are limited to 8 characters.
  3. Click the "DownLoad" button on the bottom right side of the screen (see screenshot above). This button should be named something like "Export to Laser Cutter" but then again, nothing should be named a "Soft Dog" so clearly normal naming conventions do not apply to LaserCut
    • If nothing happens, or you get an error here, you may need to restart the software.
  4. Click "Del all" in the popup window to clear out any other files that are in the laser cutters memory. (Sometimes bumblebee likes to inexplicably hang on to old files)
  5. Click "Download current" to download your current design to the the laser cutter. It may take a little bit depending on the size of your file. You should see YourFileName.mol appear in the window.

Advanced LaserCut Features

Dashed Lines

LaserCut can turn regular cut lines into dashed lines which the laser will then cut in one continuous motion. You could also make dashed lines manually with many small individual cut paths, but the laser would spend a significant amount of additional time accelerating and traveling between dashes. To make a dashed line:

  • In the cut options dialog, click the box labeled "..."
  • Enter the length of the dashes and the length of the spaces in mm in the "Cut Len" and "Space Len" fields.
    • These can be different values, so the dashes can be longer or shorter than the spaces.
  • The "Space start" check box allows a choice between the line starting with a dash or a space.

Lasercut dashed line.png

Array Output

LaserCut can take a single instance of a shape and produce an automated grid of copies of that shape to make many of the same object. This affects every object in the cut area.

  • Click the "Set array output options" button on the toolbar.
  • The "times" fields let you specify how many copies you would like both horizontally and vertically.
  • The "gap" fields let you specify the spacing between each copy along both axes
  • The "Gap Along" fields let you specify an offset for each alternating row and column
    • This could be especially useful combined with a negative "gap" value in order to efficiently nest irregular shapes

Lasercut array output.png

Manuals

Other Useful tips

Step-by-step example

How to make a test box

It's often a good idea to test your speed & power settings before cutting a material for the first time. Here's how to make a simple set of test boxes

  1. File -> New
  2. Click the Rectangle tool- 2nd icon on the left sidebar.
  3. Click and drag to make a totally random sized rectangle
  4. With the rectangle selected, click the Size tool on the left sidebar.
  5. Enter the desired size in mm. 25x25 will make about a 1" square.
  6. Copy and paste the test box to make a row of them
  7. Put each box in a new layer and try a range of settings to see what works for your purpose.

LaserCut System Configurations

Launcher

  • The batch file replaces the current configuration with a default configuration for the laser cutter you're using.
  • The visual basic script runs the batch file without opening an extraneous command prompt window while LaserCut is running.
  • Examples scripts for Bumblebee and the full default configurations for Bumblebee, Wolverine, and the Laser Rotary Wheel Attachment follow.

Bumblebee.bat

copy syscfgBumblebee.ini syscfg.ini
Lasercut53.exe

Bumblebee.vbs

'HideScript.vbs
CreateObject("Wscript.Shell").Run "Bumblebee.bat", 0, True

syscfgBumblebee.ini

[Technics]
CreateTechnicsCodeNumber=6  
CreateTechnicsCodeDefaultMode=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_LINE=TECHNICS_UNKOWN
CreateTechnicsCodeDefaultMode_IMAGE=TECHNICS_UNKOWN
TechnicsDefaultType=0
CreateTechnicsCodeDefaultMode_16711680=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_0=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_255=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_33023=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_65280=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_32768=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_16776960=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615935=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_5987163=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_3421236=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_65535=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16636309=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_7697781=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615680=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_1048455=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_3499673=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8421376=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_10263708=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_4194368=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8388736=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8388863=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_5131854=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8323072=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_12615808=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8421440=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8388672=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_10027161=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_32639=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_11974326=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_6842472=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8553090=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16751001=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16751052=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_3394764=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8421504=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_11119017=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_2565927=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_9408399=TECHNICS_LASERCUT

[CreateTechnicsCode_0]
CreateTechnicsCodeName=TECHNICS_LASERCUT

[CreateTechnicsCode_1]
CreateTechnicsCodeName=TECHNICS_LASERENGRAVE

[CreateTechnicsCode_2]
CreateTechnicsCodeName=TECHNICS_LASERGRADEENGRAVE

[CreateTechnicsCode_3]
CreateTechnicsCodeName=TECHNICS_LASERHITPOINT

[CreateTechnicsCode_4]
CreateTechnicsCodeName=TECHNICS_PENCUT

[CreateTechnicsCode_5]
CreateTechnicsCodeName=TECHNICS_KNIFECUT

[CompanyInfo]
TelPhone=Telepnone:
SoftName=Lasercut5.3
CompanyName=G
Http=www...com
PrinterName=Lasercut(Leetro)

[ApplicationSetting]
OutPutWorkFile=1
FlashDelayTime=10
UserHighConfige=1
ShowDebugWndMsg=0
MainFaceType=0
Mpc05PortNumber=1
SelectOut=0
ShowHandle=1
BackColorRed=210
BackColorGreen=255
BackColorBlue=255
PromptRevise=0
OutputPLTPath=c:\Data.PLT
LaserCutForSteel=0
LimitWorkTimes=-1
HideChineseButton=0
TipPreWorkTime=0
EcYXAxisType=0
PrintMode=1

[IMPORTFILE]
PREFILEMODE=0
NeedSuckPoint=0
SuckPointTol=0.0
ShowMinPointSize=0.0
ShowMaxPointSize=100.0
CENTERDATA=1
UnitType=0
SysPointDefaultSize=1.0
SysDXFReadPointType=0
SysDXFMaxLength=2000
SysDXFMaxWidth=2000
SysDXFMaxHeight=100
DXFCalBasicPrecision=0.5
DXFNeedCalDataBound=0
MTextTrueTypeSpaceScale=0.25
MTextShxSpaceScale=0.35
AdjustDirect=0
clockwise=1
UseDifferentColor=1
InnerColor=8388863
OutColor=4227072

[MAPARRAY]
MoveData=1

[TableSetting]
TableGridWidth=50
TableGridHeight=50

[MotionCard_0]
MotionCard_Name=Step03Card

[Step03Card_0]
MotionCardName=Step-servo Co.,Ltd
ValidIOLevel=0  
ValidLimitLevel=0
LaserPowerMode=0  
LaserDefaultPulse=25000
AxisPulseOutputMode=0 
AxisPulseOutputLogic=0 
ChecHomeIOType=0
CardVer=LH
OpenCardTipMsg=0
GradeEngraveType=3
LaserMaxPower=100
CardMinVer=1
LaserPowerTableNumber=20
LaserPowerTable_0=0
LaserPowerTable_5=5
LaserPowerTable_10=10
LaserPowerTable_15=15
LaserPowerTable_20=20
LaserPowerTable_25=25
LaserPowerTable_30=30
LaserPowerTable_35=35
LaserPowerTable_40=40
LaserPowerTable_45=45
LaserPowerTable_50=50
LaserPowerTable_55=55
LaserPowerTable_60=60
LaserPowerTable_65=65
LaserPowerTable_70=70
LaserPowerTable_75=75
LaserPowerTable_80=80
LaserPowerTable_85=85
LaserPowerTable_90=90
LaserPowerTable_95=95
LaserPowerTable_100=100
LaserLowerPulse=1000
LaserLowerPower=0.1
LaserPowerRepairPower=0
TJCardNumber=1
TJCARD_NUMBER_0=41534552
YEncodeRate=10000.000000
YSpdIncrease=300.000000
XEncodeRate=10000.000000
XSpdIncrease=300.000000
YScaleCtrl=5.000000
YIntegralCtrl=0.011500
YDiffCtrl=0.002875
XScaleCtrl=5.000000
XIntegralCtrl=0.011500
XDiffCtrl=0.002875
YScaleCtrlii=5.000000
XScaleCtrlii=5.000000
YZero=0.000000
XZero=0.000000
YIntegralUpLev=100.000000
XIntegralUpLev=100.000000
DaLimY=0.500000
DaLimX=0.500000
WaterProtected=0
ZMoveType=0
CanContinueForEngrave=0
SaveBreakTime=0.1

[Step03LXCard_0]
MotionCardName=Step-servo Co.,Ltd
ValidIOLevel=0
ValidLimitLevel=0
LaserPowerMode=0  
LaserDefaultPulse=25000
AxisPulseOutputMode=1  
AxisPulseOutputLogic=0 
ChecHomeIOType=0
CardVer=LX
OpenCardTipMsg=0
GradeEngraveType=3
CardMinVer=1
LaserMaxPower=100
LaserPowerTableNumber=20
LaserPowerTable_0=0
LaserPowerTable_5=5
LaserPowerTable_10=10
LaserPowerTable_15=15
LaserPowerTable_20=20
LaserPowerTable_25=25
LaserPowerTable_30=30
LaserPowerTable_35=35
LaserPowerTable_40=40
LaserPowerTable_45=45
LaserPowerTable_50=50
LaserPowerTable_55=55
LaserPowerTable_60=60
LaserPowerTable_65=65
LaserPowerTable_70=70
LaserPowerTable_75=75
LaserPowerTable_80=80
LaserPowerTable_85=85
LaserPowerTable_90=90
LaserPowerTable_95=95
LaserPowerTable_100=100
LaserLowerPulse=0
LaserLowerPower=0
TestCardNumber=1
SupportArcMove=0
SupportBezierMove=0
ConAccStartSpeed=200.0
MaxTrackNumInBuffer=500
ChangLaserIONumber=0

[Setup]
ShortCutTip=LaserCut 5.3
ExecuteFileName = LaserCut53.exe
TipSetupChineseLanguage=1
SetUpType=0
AutoCADTip=AutoCAD
CoreDrawTip=CorelDraw
LaserCutTip=LaserCut53
InstallPath=C:\LaserCut53

[ONEAXIS_DEFAULT]
CoordSystem_Name=单轴
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OutputIOValue_1=-1
OutputIOValue_2=-1
SysAxisOID=1
OnePulseMoveLength=0.00078125
TableLength=150
TableMinPosition=0
TableMaxPosition=150
OriginDirector=-1
OriginPosition=0
GoOriginSpeed=2
OriginOffsetLen=1.5
NeedRevise=0
StartSpeed=0.5
WorkAcc=100
HandFastMoveSpeed = 15
HandSlowMoveSpeed = 1

[TWOAXIS_DEFAULT]
CoordSystem_Name=两轴
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OneAxisSysOID=0
TwoAxisSysOID=1
OneAxisOnePulseMoveLength=0.004843750000000
TwoAxisOnePulseMoveLength=0.004843750000000
OneAxisTableLength=1000.000000
TwoAxisTableLength=600.000000
OneAxisTableMinPosition=0.000000
OneAxisTableMaxPosition=1000.000000
TwoAxisTableMinPosition=0.000000
TwoAxisTableMaxPosition=600.000000
OneAxisOriginDirector=-1
TwoAxisOriginDirector=1
OneAxisOriginPosition=0.000000
TwoAxisOriginPosition=600.000000
OneAxisGoOriginSpeed=15.000000
TwoAxisGoOriginSpeed=15.000000
NeedRevise=0
StartSpeed=10.000000
WorkAcc=1200.000000
SpaceSpeed=300.000000
ConstantSpeed=10.000000
HandFastMoveSpeed=200.000000
HandSlowMoveSpeed=50.000000
OneAxisBackLashLength=0.0
TwoAxisBackLashLength=0.0

[CoordSystem_0]
CoordSystem_Type=TWOAXIS

[CoordSystem_1]
CoordSystem_Type=ONEAXIS

[CoordSystem_2]
CoordSystem_Type=THREEAXIS

[TWOAXIS_0]
CoordSystem_Name=工作台
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OneAxisSysOID=0
TwoAxisSysOID=1
OneAxisOnePulseMoveLength=0.007200000000000
TwoAxisOnePulseMoveLength=0.007200000000000
OneAxisTableLength=1200.000000
TwoAxisTableLength=900.000000
OneAxisTableMinPosition=0.000000
OneAxisTableMaxPosition=1200.000000
TwoAxisTableMinPosition=0.000000
TwoAxisTableMaxPosition=900.000000
OneAxisOriginDirector=1
TwoAxisOriginDirector=1
OneAxisOriginPosition=1200.000000
TwoAxisOriginPosition=900.000000
OneAxisGoOriginSpeed=150.000000
TwoAxisGoOriginSpeed=150.000000
OneAxisOriginOffsetLen=5
TwoAxisOriginOffsetLen=5
NeedRevise=1
StartSpeed=5.000000
WorkAcc=500.000000
SpaceSpeed=150.000000
ConstantSpeed=8.000000
HandFastMoveSpeed=200.000000
HandSlowMoveSpeed=160.000000
OneAxisOverLapLength=0.000000
WorkAcc2=700.000000
SupportTwoXAxis=0
TwoXAxisOffsetY2=0
OneAxisOnePulseMoveLength2=0.00484375
TwoXAxisPulseMoveLen=0.0062320000
TwoXAxisReduceLen=70
ParkStartSpeedScale=1.0
ParkAccScale=1.0
ParkSpeedScale=1.0
WorkAccAcc=15000.000000
SpaceAccAcc=15000.000000
XAxisMaxChangeSpeed=10.000000
YAxisMaxChangeSpeed=10.000000
SupportTwoLaser=0
TwoLaserSpaceLength=0.000000

[ONEAXIS_1]
CoordSystem_Name=转料
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
SysAxisOID=2
OnePulseMoveLength=0.001250000000000
TableLength=380.000000
TableMinPosition=0.000000
TableMaxPosition=380.000000
OriginDirector=1
OriginPosition=380.000000
GoOriginSpeed=0.000000
OriginOffsetLen=7.500000
NeedRevise=0
WorkAcc=15.000000
HandFastMoveSpeed =15.000000
HandSlowMoveSpeed =10.000000
StartSpeed=5.000000
SpaceSpeed=10.000000
WorkAccAcc=20000.000000
SpaceAccAcc=80000.000000
AxisMaxChangeSpeed=30.000000

[HandMoveCoordSystem_DEFAULT]
HandMoveAxis1Increase=-1
HandMoveAxis1Reduce=-1
HandMoveAxis2Increase=-1
HandMoveAxis2Reduce=-1
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1
HandMoveSpeed=-1
HandMoveStepOrContinue=-1

[Technics_Laser_Data]
ExportRows=1
ExportColumns=1
ExportRowSpace=0.00000
ExportColumnSpace=0.00000
ExportRowCW=0.00000
ExportColumnCW=0.00000
DrawArrayDataType=1
LogicOrgPostionType=1
ArrayExportOrder=1
ArrayExportXOrder=1
ArrayExportYOrder=1
AtOnceExport=1
OutputTimes=1
DelayTime=0
FeedLength=0.000000
FeedSpeed=5.000000
MachineHasWorkMinute=9561
FeedDelayTime=0
ChangeSerialNo=0
OuputLayerOrderType=1
IsTwoLaserWorking=1

[LaserSimulateSpeedScale]
SimulateSpeedScaleNumber = 3
SimulateSpeed0_Min=0
SimulateSpeed0_Max=100
SimulateSpeed0_Scale=1
SimulateSpeed1_Min=100
SimulateSpeed1_Max=500
SimulateSpeed1_Scale=1
SimulateSpeed2_Min=500
SimulateSpeed2_Max=5000
SimulateSpeed2_Scale=1

[MACHINE_MODIFYCFG]
LASER_MODIFYCFG_SAVEPASSWORD=1
LASER_MODIFYCFG_PASSWORD=0

[RUNTIMECFG]
OneCoordSys_ONEAXIS_PULSE=1600
OneCoordSys_ONEAXIS_LENGTH=0.000000
TwoCoordSys_ONEAXIS_PULSE=5000
TwoCoordSys_ONEAXIS_LENGTH=36.000000
TwoCoordSys_TWOAXIS_PULSE=5000
TwoCoordSys_TWOAXIS_LENGTH=36
IMPORTFILE_CENTERDATA=1
CombineLine_TOL=0.010000
SmoothLine_JB=0
AdjustStartPt=0
NeedPartWorkCtrol=0
StartWorkDelayTime=0
NeedControlMainAxis=0
OverWorkDelayTime=0
TwoCoordSys_TWOAXIS_PULSE2=6400
TwoCoordSys_TWOAXIS_LENGTH2=50

[ResourceManager]
CreateDefaultLanguageFile=0

[GEOMETRY]
SupportARC=0

[FileFormatCfg_dst]
MaxCurveNumber=1500
MustCloseBlock=1
SmoothTol=0.500000

[FileFormatCfg_plt]
MaxCurveNumber=1500
DrawPLTUnit=1016.000000

[FileFormatCfg_ai]
MaxCurveNumber=1400

[FileFormatCfg_eps]
MaxCurveNumber=1400

[FileFormatCfg_bmp]
MaxCurveNumber=1400

[Laser]
AutoSimulateSpeed=0

[DataCheck]
overlap=0
selfinter=1
close=1
intersection=0
overlaptol=0.01
lineinterTol=0
interwithleadline=1
CheckLayerCode=-1

[COREDRAW_CAD]
MustCalSecondFile=1

[OFFSETCFG]
OffsetDist=0.100000
OffsetType=0
OffsetTolerance=0.200000
MinPointNum=6
Offset=0
connect=1

[LASERCAD]
GetEntitiesType=0

[MachineControl]
MachineMotionCardNumber = 1
MachineAXISNumber = 3
MachineInputIONumber=17
MachineOutputIONumber=10
CoordSystemNumber =2
MainCoordSystemID = 0
FeedCoordSystemOID=1
TestMoveLength=50.000000
TestLaserPower=10.000000
StartCmdDoPause=0
MachineInputIODelay=3
ClickLaserTime=0.1
ApplicationLimitType=10
TestOpenLaserType=0
ThreadWorkMode=1
PerWorkTimesApplyHardHome=0
LoopAppylHomeType=1
AtOnceExport=0
ClipBoxPower=25.000000
ClipBoxOffsetLen=2.000000
ClipBoxSpeed=50.000000
RunBoxConnerAcc=100
NeedAlign=0
PerWorkMustGoLogicHome=1
AfterGoHomeToLogicHome=0
TestIsSlowSpeed=0
ClipBoxPower2=40.000000
RunMustDatum=0
AlignMachineZPos=0.000000
LogicOrgPositionX=663.322933
LogicOrgPositionY=435.327613
NeedOutput530=0
SupportSplitBlockOutPut=0
ZAxisForLaserFocus=0
FeedAxisGoHome=0
NeedContinueTipForBlock=0

[MotionAxis_0]
MotionCard_Index=0
MotionCard_axisOID=4

[MotionAxis_1]
MotionCard_Index=0
MotionCard_axisOID=3

[MotionAxis_2]
MotionCard_Index=0
MotionCard_axisOID=2

[MotionInputIO_0];X加
MotionCard_Index=0
MotionCard_InputIOOID=38

[MotionInputIO_1];X减
MotionCard_Index=0
MotionCard_InputIOOID=46

[MotionInputIO_2];Y加
MotionCard_Index=0
MotionCard_InputIOOID=40

[MotionInputIO_3];Y减
MotionCard_Index=0
MotionCard_InputIOOID=36

[MotionInputIO_4];开始
MotionCard_Index=0
MotionCard_InputIOOID=44

[MotionInputIO_5];暂停
MotionCard_Index=0
MotionCard_InputIOOID=8

[MotionInputIO_6];停止
MotionCard_Index=0
MotionCard_InputIOOID=12

[MotionInputIO_7];按键快慢
MotionCard_Index=0
MotionCard_InputIOOID=1

[MotionInputIO_8];步进/连续
MotionCard_Index=0
MotionCard_InputIOOID=1

[MotionInputIO_9];Z加
MotionCard_Index=0
MotionCard_InputIOOID=29

[MotionInputIO_10];Z减
MotionCard_Index=0
MotionCard_InputIOOID=31

[MotionInputIO_11];回原点
MotionCard_Index=0
MotionCard_InputIOOID=10

[MotionInputIO_12];走边框
MotionCard_Index=0
MotionCard_InputIOOID=42

[MotionInputIO_13];激光点射
MotionCard_Index=0
MotionCard_InputIOOID=27

[MotionInputIO_14];XYZ对刀
MotionCard_Index=0
MotionCard_InputIOOID=-1

[MotionInputIO_15];Z轴对刀
MotionCard_Index=0
MotionCard_InputIOOID=-1

[MotionInputIO_16];盖盖保护
MotionCard_Index=0
MotionCard_InputIOOID=-1

[HandMoveCoordSystem_0]
HandMoveAxis1Increase=0
HandMoveAxis1Reduce=1  
HandMoveAxis2Increase=2
HandMoveAxis2Reduce=3  
HandMoveSpeed=7      
HandMoveStepOrContinue=8 
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1

[HandMoveCoordSystem_1]
HandMoveAxis1Increase=9  
HandMoveAxis1Reduce=10    
HandMoveSpeed=7          
HandMoveStepOrContinue=8 
HandMoveAxis2Increase=-1
HandMoveAxis2Reduce=-1
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1

[MotionOutputIO_0];激光开关
MotionCard_Index=0
MotionCard_OutputIOOID=15

[MotionOutputIO_1];功率调整
MotionCard_Index=0
MotionCard_OutputIOOID=18

[MotionOutputIO_2];吹气信号
MotionCard_Index=0
MotionCard_OutputIOOID=150

[MotionOutputIO_3];正在加工,输出的信号
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_4];随动
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_5];工作台切换
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_6];
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_7];光闸
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_8];激光
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_9]
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[TECHNICS_LASERCUT]
CreateTechnicsCodeName=激光切割
TechnicsCfgType=0
LaserCutCoordSysOID=0
LaserCutConnerPower=60.000000
LaserCutWorkPower=100.000000
LaserCutFrequency=500
LaserCutOptimizePathType=1
LaserCutInnerToOuter=1
LaserCutDownToUpper=0
LaserCutBlockHeight=150.000000
LaserCutAutoSetPathDir=1
LaserCutCicleMinSegNumber=36
LaserCutDisperseLength=0.020000
LaserCutCloseGapLength=0.000000
LaserCutOverlapLength=0.000000
LaserCutAdjustForClose=1
LaserCutQXEnterLength=0.000000
LaserCutDelayMoveTime=0.000000
LaserCutOpenLaserDelayTime=0.000000
LaserCutCloseLaserDelayTime=0.000000
LaserCutOneAxisBackLashLength=0.000000
LaserCutTwoAxisBackLashLength=0.010000
LaserCutBlowGasType=2
LaserCutAheadBlowGasTimes=0.000000
LaserCutNoCloseGasTimes=0.000000
LaserCutSpeed=25.000000
LaserCutGWAcc=60.000000
LaserCutCircleSpeedNum=0
LaserCutCircleSpeed0_MinR=0.000000
LaserCutCircleSpeed0_MaxR=0.550000
LaserCutCircleSpeed0_Speed=10.000000
LaserCutCircleSpeed1_MinR=0.550000
LaserCutCircleSpeed1_MaxR=1.050000
LaserCutCircleSpeed1_Speed=15.000000
LaserCutCircleSpeed2_MinR=1.050000
LaserCutCircleSpeed2_MaxR=1.550000
LaserCutCircleSpeed2_Speed=25.000000
LaserCutCircleSpeed3_MinR=1.550000
LaserCutCircleSpeed3_MaxR=2.050000
LaserCutCircleSpeed3_Speed=30.000000
LaserCutCircleSpeed4_MinR=2.050000
LaserCutCircleSpeed4_MaxR=3.050000
LaserCutCircleSpeed4_Speed=35.000000
LaserCutCircleSpeed5_MinR=3.050000
LaserCutCircleSpeed5_MaxR=4.050000
LaserCutCircleSpeed5_Speed=40.000000
LaserCutGWTime=0.010000
LaserCutTrackSize=100
LaserCutMaxSpeed=400.000000
LaserCutConnerPower2=30.000000
LaserCutWorkPower2=50.000000
LaserCutInnerToOuter2=0
LaserCutStartPosType=0
LaserCutDelayTimeAfterCloseLaser=0.000000
LaserCutBackLashAddSpaceLength=8.000000
LaserCutLineLength=0.000000
SpaceCutLineLength=0.000000
bSpaceLineFirst=0
LaserCutAdjustMove=0
LaserCutAdjustMoveDelay=0.000000
LaserCutUpLen=0.000000
LaserCutDisperseMinLength=0.02
LaserCutOpenGZDelayTime=0.000000
LaserCutSpeedScale1=1.0
LaserCutSpeedScale2=1.0
LaserCutSpeedScale3=1.0
LaserCutSpeedScale4=1.0
LaserCutSpeedScale5=1.0
LaserCutSpeedScale6=1.0
LaserCutSpeedScale7=1.0
LaserCutSpeedScale8=1.0
AdjustStartPointToConner=0
SplitCircleForBY=0
AdjustMoveType=0
WaitInputIODelayTime=5
RepeatOpenLaserTimes=0
SupportAIOutput=0

[TECHNICS_LASERENGRAVE]
CreateTechnicsCodeName=激光雕刻
TechnicsCfgType=0   
LaserEngraveCoordSysOID=0
LaserEngravePower=100.000000
LaserEngraveFrequency=550
LaserEngraveSpeed=400.000000
LaserEngraveBlowGasType=1
LaserEngraveFillCircleR=2.500000
LaserEngraveFillCircleSpace=2.500000
LaserEngraveFillCircle=0
LaserEngraveTwoDirector=1
LaserEngraveScanStepLen=0.150000
LaserEngraveCfgNumber=5
LaserEngraveMinSpeed_0=0.000000
LaserEngraveMaxSpeed_0=250.000000
LaserEngraveBufferLen_0=25.000000
LaserEngraveChangeDirGap_0=-0.170000
LaserEngraveStartVel_0=45.000000
LaserEngraveAcc_0=6000.000000
LaserEngraveYSpeed_0=10.000000
LaserEngraveYAcc_0=100.000000
LaserEngraveSFOffsetX_0=0.085000
LaserEngraveSFOffsetY_0=0.000000
LaserEngraveExpandPenWidth=0
LaserEngraveExpandPenWidthScale=15.000000
LaserEngraveFillCircleType=0
LaserEngraveMaxSpeed=1000.000000
LaserEngravePower2=60.000000
LaserEngraveScanDirector=0
LaserEngraveMinSpeed_1=250.000000
LaserEngraveMaxSpeed_1=350.000000
LaserEngraveBufferLen_1=25.000000
LaserEngraveChangeDirGap_1=-0.200000
LaserEngraveStartVel_1=45.000000
LaserEngraveAcc_1=6000.000000
LaserEngraveYSpeed_1=10.000000
LaserEngraveYAcc_1=100.000000
LaserEngraveSFOffsetX_1=0.100000
LaserEngraveSFOffsetY_1=0.000000
LaserEngraveMinSpeed_2=350.000000
LaserEngraveMaxSpeed_2=450.000000
LaserEngraveBufferLen_2=25.000000
LaserEngraveChangeDirGap_2=-0.240000
LaserEngraveStartVel_2=45.000000
LaserEngraveAcc_2=6000.000000
LaserEngraveYSpeed_2=10.000000
LaserEngraveYAcc_2=100.000000
LaserEngraveSFOffsetX_2=0.120000
LaserEngraveSFOffsetY_2=0.000000
LaserEngraveMinSpeed_3=450.000000
LaserEngraveMaxSpeed_3=550.000000
LaserEngraveBufferLen_3=25.000000
LaserEngraveChangeDirGap_3=-0.270000
LaserEngraveStartVel_3=45.000000
LaserEngraveAcc_3=6000.000000
LaserEngraveYSpeed_3=10.000000
LaserEngraveYAcc_3=100.000000
LaserEngraveSFOffsetX_3=0.135000
LaserEngraveSFOffsetY_3=0.000000
LaserEngraveMinSpeed_4=550.000000
LaserEngraveMaxSpeed_4=1000.000000
LaserEngraveBufferLen_4=25.000000
LaserEngraveChangeDirGap_4=-0.300000
LaserEngraveStartVel_4=45.000000
LaserEngraveAcc_4=6000.000000
LaserEngraveYSpeed_4=10.000000
LaserEngraveYAcc_4=100.000000
LaserEngraveSFOffsetX_4=0.150000
LaserEngraveSFOffsetY_4=0.000000
LaserEngraveMinSpeed_5=550.000000
LaserEngraveMaxSpeed_5=650.000000
LaserEngraveBufferLen_5=25.000000
LaserEngraveChangeDirGap_5=0.000000
LaserEngraveStartVel_5=45.000000
LaserEngraveAcc_5=6000.000000
LaserEngraveYSpeed_5=10.000000
LaserEngraveYAcc_5=100.000000
LaserEngraveSFOffsetX_5=0.000000
LaserEngraveSFOffsetY_5=0.000000
LaserEngraveMinSpeed_6=650.000000
LaserEngraveMaxSpeed_6=750.000000
LaserEngraveBufferLen_6=25.000000
LaserEngraveChangeDirGap_6=0.000000
LaserEngraveStartVel_6=45.000000
LaserEngraveAcc_6=6000.000000
LaserEngraveYSpeed_6=10.000000
LaserEngraveYAcc_6=100.000000
LaserEngraveSFOffsetX_6=0.000000
LaserEngraveSFOffsetY_6=0.000000
LaserEngraveMinSpeed_7=750.000000
LaserEngraveMaxSpeed_7=850.000000
LaserEngraveBufferLen_7=25.000000
LaserEngraveChangeDirGap_7=0.000000
LaserEngraveStartVel_7=45.000000
LaserEngraveAcc_7=6000.000000
LaserEngraveYSpeed_7=10.000000
LaserEngraveYAcc_7=100.000000
LaserEngraveSFOffsetX_7=0.000000
LaserEngraveSFOffsetY_7=0.000000
LaserEngraveMinSpeed_8=850.000000
LaserEngraveMaxSpeed_8=1000.000000
LaserEngraveBufferLen_8=25.000000
LaserEngraveChangeDirGap_8=0.000000
LaserEngraveStartVel_8=45.000000
LaserEngraveAcc_8=6000.000000
LaserEngraveYSpeed_8=10.000000
LaserEngraveYAcc_8=100.000000
LaserEngraveSFOffsetX_8=0.000000
LaserEngraveSFOffsetY_8=0.000000

[TECHNICS_LASERHITPOINT]
CreateTechnicsCodeName=激光打孔
TechnicsCfgType=0
LaserHitPointCoordSysOID=0
LaserHitPointWorkPower=60.000000
LaserHitPointFrequency=20000
LaserHitPointOptimizePathType=1
LaserHitPointDownToUpper=0
LaserHitPointInnerToOuter=1
LaserHitPointBlockHeight=150.000000
LaserHitPointAutoSetPathDir=1
LaserHitPointDisperseLength=0.050000
LaserHitPointType=1
LaserHitPointGapLength=2.000000
LaserHitPointDelayTime=0.100000
LaserHitPointBlowGasType=1
LaserHitPointWorkPower2=50.000000
LaserHitPointStartPosType=0
LaserHitPointOpenLaserDelayTime=0.000000

[TECHNICS_LASERGRADEENGRAVE]
CreateTechnicsCodeName=激光坡度雕刻
TechnicsCfgType=0   
LaserGradeEngraveCoordSysOID=0
LaserGradeEngravePower=100.000000
LaserGradeEngraveStartPower=10.000000
LaserGradeEngraveFrequency=20000
LaserGradeEngraveSpeed=50.000000
LaserGradeEngraveBlowGasType=1
LaserGradeEngraveTwoDirector=1
LaserGradeEngraveScanStepLen=1.000000
LaserGradeEngraveGradeWidth=2.000000
LaserGradeEngraveGradeNumber=32
LaserGradeEngraveNeedRepairGrade=0
LaserGradeEngraveStartRepairGrade=0.200000
LaserGradeEngraveCfgNumber=5
LaserGradeEngraveMinSpeed_0=0.000000
LaserGradeEngraveMaxSpeed_0=150.000000
LaserGradeEngraveBufferLen_0=25.000000
LaserGradeEngraveChangeDirGap_0=0.000000
LaserGradeEngraveStartVel_0=45.000000
LaserGradeEngraveAcc_0=6000.000000
LaserGradeEngraveYSpeed_0=10.000000
LaserGradeEngraveYAcc_0=100.000000
LaserGradeEngraveSFOffsetX_0=0.000000
LaserGradeEngraveSFOffsetY_0=0.000000
LaserGradeEngraveMaxSpeed=1000.000000
LaserGradeEngraveScanDirector=0
LaserGradeEngraveMinSpeed_1=150.000000
LaserGradeEngraveMaxSpeed_1=250.000000
LaserGradeEngraveBufferLen_1=25.000000
LaserGradeEngraveChangeDirGap_1=0.000000
LaserGradeEngraveStartVel_1=45.000000
LaserGradeEngraveAcc_1=6000.000000
LaserGradeEngraveYSpeed_1=10.000000
LaserGradeEngraveYAcc_1=100.000000
LaserGradeEngraveSFOffsetX_1=0.000000
LaserGradeEngraveSFOffsetY_1=0.000000
LaserGradeEngraveMinSpeed_2=250.000000
LaserGradeEngraveMaxSpeed_2=350.000000
LaserGradeEngraveBufferLen_2=25.000000
LaserGradeEngraveChangeDirGap_2=0.000000
LaserGradeEngraveStartVel_2=45.000000
LaserGradeEngraveAcc_2=6000.000000
LaserGradeEngraveYSpeed_2=10.000000
LaserGradeEngraveYAcc_2=100.000000
LaserGradeEngraveSFOffsetX_2=0.000000
LaserGradeEngraveSFOffsetY_2=0.000000
LaserGradeEngraveMinSpeed_3=350.000000
LaserGradeEngraveMaxSpeed_3=450.000000
LaserGradeEngraveBufferLen_3=25.000000
LaserGradeEngraveChangeDirGap_3=0.000000
LaserGradeEngraveStartVel_3=45.000000
LaserGradeEngraveAcc_3=6000.000000
LaserGradeEngraveYSpeed_3=10.000000
LaserGradeEngraveYAcc_3=100.000000
LaserGradeEngraveSFOffsetX_3=0.000000
LaserGradeEngraveSFOffsetY_3=0.000000
LaserGradeEngraveMinSpeed_4=450.000000
LaserGradeEngraveMaxSpeed_4=550.000000
LaserGradeEngraveBufferLen_4=25.000000
LaserGradeEngraveChangeDirGap_4=0.000000
LaserGradeEngraveStartVel_4=45.000000
LaserGradeEngraveAcc_4=6000.000000
LaserGradeEngraveYSpeed_4=10.000000
LaserGradeEngraveYAcc_4=100.000000
LaserGradeEngraveSFOffsetX_4=0.000000
LaserGradeEngraveSFOffsetY_4=0.000000

[TechnicsOrign]
StopPosition=9
ResponseEvent=1
[textdefault]
FontHeight=10
FontSpace=.8
text=Out                    
FontName=Georgia
IsTrueType=1
mainShxName=txt
subShxName=NULL

[MainAxisSpeed]
MainAxisDefaultIndex=0
[FileFormatCfg_ECP]
MaxCurveNumber=1500

[LayerManager]
HideNoOutputLayer=0
ApplyAllLayerAttrib=1
[FileFormatCfg_map]
MaxCurveNumber=1500
[TECHNICS_PENCUT]
CreateTechnicsCodeName=无名
TechnicsCfgType=0
PenCutCoordSysOID=0
PenCutOptimizePathType=1
PenCutInnerToOuter=1
PenCutDownToUpper=0
PenCutBlockHeight=150.000000
PenCutAutoSetPathDir=1
PenCutCicleMinSegNumber=36
PenCutDisperseLength=0.050000
PenCutCloseGapLength=0.000000
PenCutOverlapLength=0.000000
PenCutAdjustForClose=0
PenCutQXEnterLength=1.000000
PenCutDelayDownTime=0.000000
PenCutDelayUpTime=0.000000
PenCutOneAxisBackLashLength=0.000000
PenCutTwoAxisBackLashLength=0.000000
PenCutSpeed=75.000000
PenCutGWAcc=3000.000000
PenCutGWTime=0.010000
PenCutTrackSize=100
PenCutOffsetX=0.000000
PenCutOffsetY=0.000000
PenCutCtrolMode=0
PenCutCircleSpeedNum=0
[TECHNICS_KNIFECUT]
KnifeCutDownSpeed=20

[TechcisMode]
SupportMachineEngrave=0
[CreateTextCmd]
SupportReverse=0
Convert2Curve=1
[FileFormatCfg_dxf]
MaxCurveNumber=1500
[ArrayCopyCmd]
SupportSPath=1
CenterAlign=0
[DaHen]
NeedSetChangePower=0
StartPower=0
ChangePowerPoint=0
ChangeFrq=0
[AutoCalLeadInAndOutTrack]
AdjustStartPointToConner=0
MinInflectionAngle=45.000000
MinInflectionLength=20.000000
OverLapLength=0.000000
ReserveBlockType=1
MinInterDistance=1.000000
InLeadLineType=0
InLeadLineLength=2.500000
InLeadLineAngle=45.000000
OutLeadLineType=0
OutLeadLineLength=2.500000
OutLeadLineAngle=45.000000
AutoAdjustStartPos=1
AutoAdjustStartPosToMidLine=1
KnifeGapOffset=0.000000
OffsetType=1
GetDataByLayer=0
AutoCheckDataRight=0
AutoCheckIntersect=0
AutoCheckTimes=2
MaxLeadLineLen=10.0
[CreateGroupCmd]
ChangeToFirstLayer=1
[ImportFileAdjustData]
AdjustCircleMode=0
CircleRadius=5.0000000000
[HALF_BMP]
DotSize=1
ScanStep=0.01
[AddInOutLead]
UseLineConnect=0
LineConnectLength=0.0
LineConnectAngle=0.0
InType=0
InArcRadius=2.0
InLineLength=.5
InAngle=0.00
OutType=0
OutArcRadius=2.0
OutLineLength=.5
OutAngle=0.00
StartDir=1
OverLapLength=0.00
StartDirType=0
CloseType=0
Valid=0
[CreateLineCmd]
length=1
direct=0

syscfgWolverine.ini

[Technics]
CreateTechnicsCodeNumber=6  
CreateTechnicsCodeDefaultMode=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_LINE=TECHNICS_UNKOWN
CreateTechnicsCodeDefaultMode_IMAGE=TECHNICS_UNKOWN
TechnicsDefaultType=0
CreateTechnicsCodeDefaultMode_16711680=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_0=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_255=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_33023=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_65280=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_32768=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_16776960=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615935=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_5987163=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_3421236=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_65535=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_16636309=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_7697781=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615680=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_1048455=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_3499673=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8421376=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_10263708=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_4194368=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8388736=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8388863=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_5131854=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8323072=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615808=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8421440=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8388672=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_10027161=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_32639=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_11974326=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_6842472=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8553090=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16751001=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16751052=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_3394764=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8421504=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_11119017=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_2565927=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_9408399=TECHNICS_LASERCUT

[CreateTechnicsCode_0]
CreateTechnicsCodeName=TECHNICS_LASERCUT

[CreateTechnicsCode_1]
CreateTechnicsCodeName=TECHNICS_LASERENGRAVE

[CreateTechnicsCode_2]
CreateTechnicsCodeName=TECHNICS_LASERGRADEENGRAVE

[CreateTechnicsCode_3]
CreateTechnicsCodeName=TECHNICS_LASERHITPOINT

[CreateTechnicsCode_4]
CreateTechnicsCodeName=TECHNICS_PENCUT

[CreateTechnicsCode_5]
CreateTechnicsCodeName=TECHNICS_KNIFECUT

[CompanyInfo]
TelPhone=Telepnone:
SoftName=Lasercut5.3
CompanyName=G
Http=www...com
PrinterName=Lasercut(Leetro)

[ApplicationSetting]
OutPutWorkFile=1
FlashDelayTime=10
UserHighConfige=1
ShowDebugWndMsg=0
MainFaceType=0
Mpc05PortNumber=1
SelectOut=0
ShowHandle=1
BackColorRed=210
BackColorGreen=255
BackColorBlue=255
PromptRevise=0
OutputPLTPath=c:\Data.PLT
LaserCutForSteel=0
LimitWorkTimes=-1
HideChineseButton=0
TipPreWorkTime=0
EcYXAxisType=0
PrintMode=1

[IMPORTFILE]
PREFILEMODE=0
NeedSuckPoint=0
SuckPointTol=0.0
ShowMinPointSize=0.0
ShowMaxPointSize=100.0
CENTERDATA=1
UnitType=0
SysPointDefaultSize=1.0
SysDXFReadPointType=0
SysDXFMaxLength=2000
SysDXFMaxWidth=2000
SysDXFMaxHeight=100
DXFCalBasicPrecision=0.5
DXFNeedCalDataBound=0
MTextTrueTypeSpaceScale=0.25
MTextShxSpaceScale=0.35
AdjustDirect=0
clockwise=1
UseDifferentColor=1
InnerColor=8388863
OutColor=4227072

[MAPARRAY]
MoveData=1

[TableSetting]
TableGridWidth=50
TableGridHeight=50

[MotionCard_0]
MotionCard_Name=Step03Card

[Step03Card_0]
MotionCardName=Step-servo Co.,Ltd
ValidIOLevel=0  
ValidLimitLevel=0
LaserPowerMode=0  
LaserDefaultPulse=25000
AxisPulseOutputMode=0 
AxisPulseOutputLogic=0 
ChecHomeIOType=0
CardVer=LH
OpenCardTipMsg=0
GradeEngraveType=3
LaserMaxPower=100
CardMinVer=1
LaserPowerTableNumber=20
LaserPowerTable_0=0
LaserPowerTable_5=5
LaserPowerTable_10=10
LaserPowerTable_15=15
LaserPowerTable_20=20
LaserPowerTable_25=25
LaserPowerTable_30=30
LaserPowerTable_35=35
LaserPowerTable_40=40
LaserPowerTable_45=45
LaserPowerTable_50=50
LaserPowerTable_55=55
LaserPowerTable_60=60
LaserPowerTable_65=65
LaserPowerTable_70=70
LaserPowerTable_75=75
LaserPowerTable_80=80
LaserPowerTable_85=85
LaserPowerTable_90=90
LaserPowerTable_95=95
LaserPowerTable_100=100
LaserLowerPulse=1000
LaserLowerPower=0.1
LaserPowerRepairPower=0
TJCardNumber=1
TJCARD_NUMBER_0=1f00001f
YEncodeRate=10000.000000
YSpdIncrease=300.000000
XEncodeRate=10000.000000
XSpdIncrease=300.000000
YScaleCtrl=5.000000
YIntegralCtrl=0.011500
YDiffCtrl=0.002875
XScaleCtrl=5.000000
XIntegralCtrl=0.011500
XDiffCtrl=0.002875
YScaleCtrlii=5.000000
XScaleCtrlii=5.000000
YZero=0.000000
XZero=0.000000
YIntegralUpLev=100.000000
XIntegralUpLev=100.000000
DaLimY=0.500000
DaLimX=0.500000
WaterProtected=0
ZMoveType=0
CanContinueForEngrave=0
SaveBreakTime=0.1

[Step03LXCard_0]
MotionCardName=Step-servo Co.,Ltd
ValidIOLevel=0
ValidLimitLevel=0
LaserPowerMode=0  
LaserDefaultPulse=25000
AxisPulseOutputMode=1  
AxisPulseOutputLogic=0 
ChecHomeIOType=0
CardVer=LX
OpenCardTipMsg=0
GradeEngraveType=3
CardMinVer=1
LaserMaxPower=100
LaserPowerTableNumber=20
LaserPowerTable_0=0
LaserPowerTable_5=5
LaserPowerTable_10=10
LaserPowerTable_15=15
LaserPowerTable_20=20
LaserPowerTable_25=25
LaserPowerTable_30=30
LaserPowerTable_35=35
LaserPowerTable_40=40
LaserPowerTable_45=45
LaserPowerTable_50=50
LaserPowerTable_55=55
LaserPowerTable_60=60
LaserPowerTable_65=65
LaserPowerTable_70=70
LaserPowerTable_75=75
LaserPowerTable_80=80
LaserPowerTable_85=85
LaserPowerTable_90=90
LaserPowerTable_95=95
LaserPowerTable_100=100
LaserLowerPulse=0
LaserLowerPower=0
TestCardNumber=1
SupportArcMove=0
SupportBezierMove=0
ConAccStartSpeed=200.0
MaxTrackNumInBuffer=500
ChangLaserIONumber=0

[Setup]
ShortCutTip=LaserCut 5.3
ExecuteFileName = LaserCut53.exe
TipSetupChineseLanguage=1
SetUpType=0
AutoCADTip=AutoCAD
CoreDrawTip=CorelDraw
LaserCutTip=LaserCut53
InstallPath=C:\LaserCut53

[ONEAXIS_DEFAULT]
CoordSystem_Name=单轴
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OutputIOValue_1=-1
OutputIOValue_2=-1
SysAxisOID=1
OnePulseMoveLength=0.00078125
TableLength=150
TableMinPosition=0
TableMaxPosition=150
OriginDirector=-1
OriginPosition=0
GoOriginSpeed=2
OriginOffsetLen=1.5
NeedRevise=0
StartSpeed=0.5
WorkAcc=100
HandFastMoveSpeed = 15
HandSlowMoveSpeed = 1

[TWOAXIS_DEFAULT]
CoordSystem_Name=两轴
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OneAxisSysOID=0
TwoAxisSysOID=1
OneAxisOnePulseMoveLength=0.004843750000000
TwoAxisOnePulseMoveLength=0.004843750000000
OneAxisTableLength=1000.000000
TwoAxisTableLength=600.000000
OneAxisTableMinPosition=0.000000
OneAxisTableMaxPosition=1000.000000
TwoAxisTableMinPosition=0.000000
TwoAxisTableMaxPosition=600.000000
OneAxisOriginDirector=-1
TwoAxisOriginDirector=1
OneAxisOriginPosition=0.000000
TwoAxisOriginPosition=600.000000
OneAxisGoOriginSpeed=15.000000
TwoAxisGoOriginSpeed=15.000000
NeedRevise=0
StartSpeed=10.000000
WorkAcc=1200.000000
SpaceSpeed=300.000000
ConstantSpeed=10.000000
HandFastMoveSpeed=200.000000
HandSlowMoveSpeed=50.000000
OneAxisBackLashLength=0.0
TwoAxisBackLashLength=0.0

[CoordSystem_0]
CoordSystem_Type=TWOAXIS

[CoordSystem_1]
CoordSystem_Type=ONEAXIS

[CoordSystem_2]
CoordSystem_Type=THREEAXIS

[TWOAXIS_0]
CoordSystem_Name=工作台
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OneAxisSysOID=0
TwoAxisSysOID=1
OneAxisOnePulseMoveLength=0.004800000000000
TwoAxisOnePulseMoveLength=0.004800000000000
OneAxisTableLength=1200.000000
TwoAxisTableLength=900.000000
OneAxisTableMinPosition=0.000000
OneAxisTableMaxPosition=1200.000000
TwoAxisTableMinPosition=0.000000
TwoAxisTableMaxPosition=900.000000
OneAxisOriginDirector=1
TwoAxisOriginDirector=1
OneAxisOriginPosition=1200.000000
TwoAxisOriginPosition=900.000000
OneAxisGoOriginSpeed=150.000000
TwoAxisGoOriginSpeed=150.000000
OneAxisOriginOffsetLen=5
TwoAxisOriginOffsetLen=5
NeedRevise=1
StartSpeed=5.000000
WorkAcc=500.000000
SpaceSpeed=150.000000
ConstantSpeed=8.000000
HandFastMoveSpeed=200.000000
HandSlowMoveSpeed=160.000000
OneAxisOverLapLength=0.000000
WorkAcc2=700.000000
SupportTwoXAxis=0
TwoXAxisOffsetY2=0
OneAxisOnePulseMoveLength2=0.00484375
TwoXAxisPulseMoveLen=0.0062320000
TwoXAxisReduceLen=70
ParkStartSpeedScale=1.0
ParkAccScale=1.0
ParkSpeedScale=1.0
WorkAccAcc=15000.000000
SpaceAccAcc=15000.000000
XAxisMaxChangeSpeed=10.000000
YAxisMaxChangeSpeed=10.000000
SupportTwoLaser=0
TwoLaserSpaceLength=0.000000

[ONEAXIS_1]
CoordSystem_Name=转料
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
SysAxisOID=2
OnePulseMoveLength=0.001250000000000
TableLength=380.000000
TableMinPosition=0.000000
TableMaxPosition=380.000000
OriginDirector=1
OriginPosition=380.000000
GoOriginSpeed=0.000000
OriginOffsetLen=7.500000
NeedRevise=0
WorkAcc=15.000000
HandFastMoveSpeed =15.000000
HandSlowMoveSpeed =10.000000
StartSpeed=5.000000
SpaceSpeed=10.000000
WorkAccAcc=20000.000000
SpaceAccAcc=80000.000000
AxisMaxChangeSpeed=30.000000

[HandMoveCoordSystem_DEFAULT]
HandMoveAxis1Increase=-1
HandMoveAxis1Reduce=-1
HandMoveAxis2Increase=-1
HandMoveAxis2Reduce=-1
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1
HandMoveSpeed=-1
HandMoveStepOrContinue=-1

[Technics_Laser_Data]
ExportRows=1
ExportColumns=1
ExportRowSpace=0.00000
ExportColumnSpace=0.00000
ExportRowCW=0.00000
ExportColumnCW=0.00000
DrawArrayDataType=1
LogicOrgPostionType=1
ArrayExportOrder=1
ArrayExportXOrder=1
ArrayExportYOrder=1
AtOnceExport=1
OutputTimes=1
DelayTime=0
FeedLength=0.000000
FeedSpeed=5.000000
MachineHasWorkMinute=12104
FeedDelayTime=0
ChangeSerialNo=0
OuputLayerOrderType=1
IsTwoLaserWorking=1

[LaserSimulateSpeedScale]
SimulateSpeedScaleNumber = 3
SimulateSpeed0_Min=0
SimulateSpeed0_Max=100
SimulateSpeed0_Scale=1
SimulateSpeed1_Min=100
SimulateSpeed1_Max=500
SimulateSpeed1_Scale=1
SimulateSpeed2_Min=500
SimulateSpeed2_Max=5000
SimulateSpeed2_Scale=1

[MACHINE_MODIFYCFG]
LASER_MODIFYCFG_SAVEPASSWORD=1
LASER_MODIFYCFG_PASSWORD=0

[RUNTIMECFG]
OneCoordSys_ONEAXIS_PULSE=1600
OneCoordSys_ONEAXIS_LENGTH=0.000000
TwoCoordSys_ONEAXIS_PULSE=5000
TwoCoordSys_ONEAXIS_LENGTH=24.000000
TwoCoordSys_TWOAXIS_PULSE=5000
TwoCoordSys_TWOAXIS_LENGTH=24.000000
IMPORTFILE_CENTERDATA=1
CombineLine_TOL=0.100000
SmoothLine_JB=1
AdjustStartPt=0
NeedPartWorkCtrol=0
StartWorkDelayTime=0
NeedControlMainAxis=0
OverWorkDelayTime=0
TwoCoordSys_TWOAXIS_PULSE2=5000
TwoCoordSys_TWOAXIS_LENGTH2=50

[ResourceManager]
CreateDefaultLanguageFile=0

[GEOMETRY]
SupportARC=0

[FileFormatCfg_dst]
MaxCurveNumber=1500
MustCloseBlock=1
SmoothTol=0.500000

[FileFormatCfg_plt]
MaxCurveNumber=1500
DrawPLTUnit=1016.000000

[FileFormatCfg_ai]
MaxCurveNumber=1400

[FileFormatCfg_eps]
MaxCurveNumber=1400

[FileFormatCfg_bmp]
MaxCurveNumber=1400

[Laser]
AutoSimulateSpeed=15

[DataCheck]
overlap=1
selfinter=1
close=1
intersection=1
overlaptol=0.01
lineinterTol=0
interwithleadline=1
CheckLayerCode=-1

[COREDRAW_CAD]
MustCalSecondFile=1

[OFFSETCFG]
OffsetDist=0.100000
OffsetType=0
OffsetTolerance=0.200000
MinPointNum=6
Offset=1
connect=1

[LASERCAD]
GetEntitiesType=0

[MachineControl]
MachineMotionCardNumber = 1
MachineAXISNumber = 3
MachineInputIONumber=17
MachineOutputIONumber=10
CoordSystemNumber =2
MainCoordSystemID = 0
FeedCoordSystemOID=1
TestMoveLength=50.000000
TestLaserPower=10.000000
StartCmdDoPause=0
MachineInputIODelay=3
ClickLaserTime=0.1
ApplicationLimitType=10
TestOpenLaserType=0
ThreadWorkMode=1
PerWorkTimesApplyHardHome=0
LoopAppylHomeType=1
AtOnceExport=0
ClipBoxPower=40.000000
ClipBoxOffsetLen=2.000000
ClipBoxSpeed=25.000000
RunBoxConnerAcc=100
NeedAlign=0
PerWorkMustGoLogicHome=1
AfterGoHomeToLogicHome=0
TestIsSlowSpeed=0
ClipBoxPower2=40.000000
RunMustDatum=0
AlignMachineZPos=0.000000
LogicOrgPositionX=600.000000
LogicOrgPositionY=314.120000
NeedOutput530=0
SupportSplitBlockOutPut=0
ZAxisForLaserFocus=0
FeedAxisGoHome=0
NeedContinueTipForBlock=0

[MotionAxis_0]
MotionCard_Index=0
MotionCard_axisOID=4

[MotionAxis_1]
MotionCard_Index=0
MotionCard_axisOID=3

[MotionAxis_2]
MotionCard_Index=0
MotionCard_axisOID=2

[MotionInputIO_0];X加
MotionCard_Index=0
MotionCard_InputIOOID=38

[MotionInputIO_1];X减
MotionCard_Index=0
MotionCard_InputIOOID=46

[MotionInputIO_2];Y加
MotionCard_Index=0
MotionCard_InputIOOID=40

[MotionInputIO_3];Y减
MotionCard_Index=0
MotionCard_InputIOOID=36

[MotionInputIO_4];开始
MotionCard_Index=0
MotionCard_InputIOOID=44

[MotionInputIO_5];暂停
MotionCard_Index=0
MotionCard_InputIOOID=8

[MotionInputIO_6];停止
MotionCard_Index=0
MotionCard_InputIOOID=12

[MotionInputIO_7];按键快慢
MotionCard_Index=0
MotionCard_InputIOOID=1

[MotionInputIO_8];步进/连续
MotionCard_Index=0
MotionCard_InputIOOID=1

[MotionInputIO_9];Z加
MotionCard_Index=0
MotionCard_InputIOOID=29

[MotionInputIO_10];Z减
MotionCard_Index=0
MotionCard_InputIOOID=31

[MotionInputIO_11];回原点
MotionCard_Index=0
MotionCard_InputIOOID=10

[MotionInputIO_12];走边框
MotionCard_Index=0
MotionCard_InputIOOID=42

[MotionInputIO_13];激光点射
MotionCard_Index=0
MotionCard_InputIOOID=27

[MotionInputIO_14];XYZ对刀
MotionCard_Index=0
MotionCard_InputIOOID=-1

[MotionInputIO_15];Z轴对刀
MotionCard_Index=0
MotionCard_InputIOOID=-1

[MotionInputIO_16];盖盖保护
MotionCard_Index=0
MotionCard_InputIOOID=-1

[HandMoveCoordSystem_0]
HandMoveAxis1Increase=0
HandMoveAxis1Reduce=1  
HandMoveAxis2Increase=2
HandMoveAxis2Reduce=3  
HandMoveSpeed=7      
HandMoveStepOrContinue=8 
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1

[HandMoveCoordSystem_1]
HandMoveAxis1Increase=9  
HandMoveAxis1Reduce=10    
HandMoveSpeed=7          
HandMoveStepOrContinue=8 
HandMoveAxis2Increase=-1
HandMoveAxis2Reduce=-1
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1

[MotionOutputIO_0];激光开关
MotionCard_Index=0
MotionCard_OutputIOOID=15

[MotionOutputIO_1];功率调整
MotionCard_Index=0
MotionCard_OutputIOOID=18

[MotionOutputIO_2];吹气信号
MotionCard_Index=0
MotionCard_OutputIOOID=150

[MotionOutputIO_3];正在加工,输出的信号
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_4];随动
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_5];工作台切换
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_6];
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_7];光闸
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_8];激光
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_9]
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[TECHNICS_LASERCUT]
CreateTechnicsCodeName=激光切割
TechnicsCfgType=0
LaserCutCoordSysOID=0
LaserCutConnerPower=70.000000
LaserCutWorkPower=100.000000
LaserCutFrequency=3500
LaserCutOptimizePathType=1
LaserCutInnerToOuter=1
LaserCutDownToUpper=0
LaserCutBlockHeight=150.000000
LaserCutAutoSetPathDir=1
LaserCutCicleMinSegNumber=36
LaserCutDisperseLength=0.020000
LaserCutCloseGapLength=0.000000
LaserCutOverlapLength=0.000000
LaserCutAdjustForClose=1
LaserCutQXEnterLength=0.000000
LaserCutDelayMoveTime=0.000000
LaserCutOpenLaserDelayTime=0.000000
LaserCutCloseLaserDelayTime=0.000000
LaserCutOneAxisBackLashLength=0.000000
LaserCutTwoAxisBackLashLength=0.010000
LaserCutBlowGasType=2
LaserCutAheadBlowGasTimes=0.000000
LaserCutNoCloseGasTimes=0.000000
LaserCutSpeed=25.000000
LaserCutGWAcc=100.000000
LaserCutCircleSpeedNum=0
LaserCutCircleSpeed0_MinR=0.000000
LaserCutCircleSpeed0_MaxR=0.550000
LaserCutCircleSpeed0_Speed=10.000000
LaserCutCircleSpeed1_MinR=0.550000
LaserCutCircleSpeed1_MaxR=1.050000
LaserCutCircleSpeed1_Speed=15.000000
LaserCutCircleSpeed2_MinR=1.050000
LaserCutCircleSpeed2_MaxR=1.550000
LaserCutCircleSpeed2_Speed=25.000000
LaserCutCircleSpeed3_MinR=1.550000
LaserCutCircleSpeed3_MaxR=2.050000
LaserCutCircleSpeed3_Speed=30.000000
LaserCutCircleSpeed4_MinR=2.050000
LaserCutCircleSpeed4_MaxR=3.050000
LaserCutCircleSpeed4_Speed=35.000000
LaserCutCircleSpeed5_MinR=3.050000
LaserCutCircleSpeed5_MaxR=4.050000
LaserCutCircleSpeed5_Speed=40.000000
LaserCutGWTime=0.010000
LaserCutTrackSize=100
LaserCutMaxSpeed=400.000000
LaserCutConnerPower2=30.000000
LaserCutWorkPower2=50.000000
LaserCutInnerToOuter2=0
LaserCutStartPosType=0
LaserCutDelayTimeAfterCloseLaser=0.000000
LaserCutBackLashAddSpaceLength=8.000000
LaserCutLineLength=0.000000
SpaceCutLineLength=0.000000
bSpaceLineFirst=0
LaserCutAdjustMove=0
LaserCutAdjustMoveDelay=0.000000
LaserCutUpLen=0.000000
LaserCutDisperseMinLength=0.02
LaserCutOpenGZDelayTime=0.000000
LaserCutSpeedScale1=1.0
LaserCutSpeedScale2=1.0
LaserCutSpeedScale3=1.0
LaserCutSpeedScale4=1.0
LaserCutSpeedScale5=1.0
LaserCutSpeedScale6=1.0
LaserCutSpeedScale7=1.0
LaserCutSpeedScale8=1.0
AdjustStartPointToConner=0
SplitCircleForBY=0
AdjustMoveType=0
WaitInputIODelayTime=5
RepeatOpenLaserTimes=0
SupportAIOutput=0

[TECHNICS_LASERENGRAVE]
CreateTechnicsCodeName=激光雕刻
TechnicsCfgType=0   
LaserEngraveCoordSysOID=0
LaserEngravePower=50.000000
LaserEngraveFrequency=550
LaserEngraveSpeed=700.000000
LaserEngraveBlowGasType=1
LaserEngraveFillCircleR=2.500000
LaserEngraveFillCircleSpace=2.500000
LaserEngraveFillCircle=0
LaserEngraveTwoDirector=1
LaserEngraveScanStepLen=0.150000
LaserEngraveCfgNumber=5
LaserEngraveMinSpeed_0=0.000000
LaserEngraveMaxSpeed_0=250.000000
LaserEngraveBufferLen_0=25.000000
LaserEngraveChangeDirGap_0=-0.170000
LaserEngraveStartVel_0=45.000000
LaserEngraveAcc_0=6000.000000
LaserEngraveYSpeed_0=10.000000
LaserEngraveYAcc_0=100.000000
LaserEngraveSFOffsetX_0=0.085000
LaserEngraveSFOffsetY_0=0.000000
LaserEngraveExpandPenWidth=0
LaserEngraveExpandPenWidthScale=15.000000
LaserEngraveFillCircleType=0
LaserEngraveMaxSpeed=1000.000000
LaserEngravePower2=60.000000
LaserEngraveScanDirector=0
LaserEngraveMinSpeed_1=250.000000
LaserEngraveMaxSpeed_1=350.000000
LaserEngraveBufferLen_1=25.000000
LaserEngraveChangeDirGap_1=-0.200000
LaserEngraveStartVel_1=45.000000
LaserEngraveAcc_1=6000.000000
LaserEngraveYSpeed_1=10.000000
LaserEngraveYAcc_1=100.000000
LaserEngraveSFOffsetX_1=0.100000
LaserEngraveSFOffsetY_1=0.000000
LaserEngraveMinSpeed_2=350.000000
LaserEngraveMaxSpeed_2=450.000000
LaserEngraveBufferLen_2=25.000000
LaserEngraveChangeDirGap_2=-0.240000
LaserEngraveStartVel_2=45.000000
LaserEngraveAcc_2=6000.000000
LaserEngraveYSpeed_2=10.000000
LaserEngraveYAcc_2=100.000000
LaserEngraveSFOffsetX_2=0.120000
LaserEngraveSFOffsetY_2=0.000000
LaserEngraveMinSpeed_3=450.000000
LaserEngraveMaxSpeed_3=550.000000
LaserEngraveBufferLen_3=25.000000
LaserEngraveChangeDirGap_3=-0.270000
LaserEngraveStartVel_3=45.000000
LaserEngraveAcc_3=6000.000000
LaserEngraveYSpeed_3=10.000000
LaserEngraveYAcc_3=100.000000
LaserEngraveSFOffsetX_3=0.135000
LaserEngraveSFOffsetY_3=0.000000
LaserEngraveMinSpeed_4=550.000000
LaserEngraveMaxSpeed_4=1000.000000
LaserEngraveBufferLen_4=25.000000
LaserEngraveChangeDirGap_4=-0.300000
LaserEngraveStartVel_4=45.000000
LaserEngraveAcc_4=6000.000000
LaserEngraveYSpeed_4=10.000000
LaserEngraveYAcc_4=100.000000
LaserEngraveSFOffsetX_4=0.150000
LaserEngraveSFOffsetY_4=0.000000
LaserEngraveMinSpeed_5=550.000000
LaserEngraveMaxSpeed_5=650.000000
LaserEngraveBufferLen_5=25.000000
LaserEngraveChangeDirGap_5=0.000000
LaserEngraveStartVel_5=45.000000
LaserEngraveAcc_5=6000.000000
LaserEngraveYSpeed_5=10.000000
LaserEngraveYAcc_5=100.000000
LaserEngraveSFOffsetX_5=0.000000
LaserEngraveSFOffsetY_5=0.000000
LaserEngraveMinSpeed_6=650.000000
LaserEngraveMaxSpeed_6=750.000000
LaserEngraveBufferLen_6=25.000000
LaserEngraveChangeDirGap_6=0.000000
LaserEngraveStartVel_6=45.000000
LaserEngraveAcc_6=6000.000000
LaserEngraveYSpeed_6=10.000000
LaserEngraveYAcc_6=100.000000
LaserEngraveSFOffsetX_6=0.000000
LaserEngraveSFOffsetY_6=0.000000
LaserEngraveMinSpeed_7=750.000000
LaserEngraveMaxSpeed_7=850.000000
LaserEngraveBufferLen_7=25.000000
LaserEngraveChangeDirGap_7=0.000000
LaserEngraveStartVel_7=45.000000
LaserEngraveAcc_7=6000.000000
LaserEngraveYSpeed_7=10.000000
LaserEngraveYAcc_7=100.000000
LaserEngraveSFOffsetX_7=0.000000
LaserEngraveSFOffsetY_7=0.000000
LaserEngraveMinSpeed_8=850.000000
LaserEngraveMaxSpeed_8=1000.000000
LaserEngraveBufferLen_8=25.000000
LaserEngraveChangeDirGap_8=0.000000
LaserEngraveStartVel_8=45.000000
LaserEngraveAcc_8=6000.000000
LaserEngraveYSpeed_8=10.000000
LaserEngraveYAcc_8=100.000000
LaserEngraveSFOffsetX_8=0.000000
LaserEngraveSFOffsetY_8=0.000000

[TECHNICS_LASERHITPOINT]
CreateTechnicsCodeName=激光打孔
TechnicsCfgType=0
LaserHitPointCoordSysOID=0
LaserHitPointWorkPower=60.000000
LaserHitPointFrequency=20000
LaserHitPointOptimizePathType=1
LaserHitPointDownToUpper=0
LaserHitPointInnerToOuter=1
LaserHitPointBlockHeight=150.000000
LaserHitPointAutoSetPathDir=1
LaserHitPointDisperseLength=0.050000
LaserHitPointType=1
LaserHitPointGapLength=2.000000
LaserHitPointDelayTime=0.100000
LaserHitPointBlowGasType=1
LaserHitPointWorkPower2=50.000000
LaserHitPointStartPosType=0
LaserHitPointOpenLaserDelayTime=0.000000

[TECHNICS_LASERGRADEENGRAVE]
CreateTechnicsCodeName=激光坡度雕刻
TechnicsCfgType=0   
LaserGradeEngraveCoordSysOID=0
LaserGradeEngravePower=16.000000
LaserGradeEngraveStartPower=10.000000
LaserGradeEngraveFrequency=20000
LaserGradeEngraveSpeed=400.000000
LaserGradeEngraveBlowGasType=1
LaserGradeEngraveTwoDirector=1
LaserGradeEngraveScanStepLen=1.000000
LaserGradeEngraveGradeWidth=2.000000
LaserGradeEngraveGradeNumber=32
LaserGradeEngraveNeedRepairGrade=0
LaserGradeEngraveStartRepairGrade=0.200000
LaserGradeEngraveCfgNumber=5
LaserGradeEngraveMinSpeed_0=0.000000
LaserGradeEngraveMaxSpeed_0=150.000000
LaserGradeEngraveBufferLen_0=25.000000
LaserGradeEngraveChangeDirGap_0=0.000000
LaserGradeEngraveStartVel_0=45.000000
LaserGradeEngraveAcc_0=6000.000000
LaserGradeEngraveYSpeed_0=10.000000
LaserGradeEngraveYAcc_0=100.000000
LaserGradeEngraveSFOffsetX_0=0.000000
LaserGradeEngraveSFOffsetY_0=0.000000
LaserGradeEngraveMaxSpeed=1000.000000
LaserGradeEngraveScanDirector=0
LaserGradeEngraveMinSpeed_1=150.000000
LaserGradeEngraveMaxSpeed_1=250.000000
LaserGradeEngraveBufferLen_1=25.000000
LaserGradeEngraveChangeDirGap_1=0.000000
LaserGradeEngraveStartVel_1=45.000000
LaserGradeEngraveAcc_1=6000.000000
LaserGradeEngraveYSpeed_1=10.000000
LaserGradeEngraveYAcc_1=100.000000
LaserGradeEngraveSFOffsetX_1=0.000000
LaserGradeEngraveSFOffsetY_1=0.000000
LaserGradeEngraveMinSpeed_2=250.000000
LaserGradeEngraveMaxSpeed_2=350.000000
LaserGradeEngraveBufferLen_2=25.000000
LaserGradeEngraveChangeDirGap_2=0.000000
LaserGradeEngraveStartVel_2=45.000000
LaserGradeEngraveAcc_2=6000.000000
LaserGradeEngraveYSpeed_2=10.000000
LaserGradeEngraveYAcc_2=100.000000
LaserGradeEngraveSFOffsetX_2=0.000000
LaserGradeEngraveSFOffsetY_2=0.000000
LaserGradeEngraveMinSpeed_3=350.000000
LaserGradeEngraveMaxSpeed_3=450.000000
LaserGradeEngraveBufferLen_3=25.000000
LaserGradeEngraveChangeDirGap_3=0.000000
LaserGradeEngraveStartVel_3=45.000000
LaserGradeEngraveAcc_3=6000.000000
LaserGradeEngraveYSpeed_3=10.000000
LaserGradeEngraveYAcc_3=100.000000
LaserGradeEngraveSFOffsetX_3=0.000000
LaserGradeEngraveSFOffsetY_3=0.000000
LaserGradeEngraveMinSpeed_4=450.000000
LaserGradeEngraveMaxSpeed_4=550.000000
LaserGradeEngraveBufferLen_4=25.000000
LaserGradeEngraveChangeDirGap_4=0.000000
LaserGradeEngraveStartVel_4=45.000000
LaserGradeEngraveAcc_4=6000.000000
LaserGradeEngraveYSpeed_4=10.000000
LaserGradeEngraveYAcc_4=100.000000
LaserGradeEngraveSFOffsetX_4=0.000000
LaserGradeEngraveSFOffsetY_4=0.000000

[TechnicsOrign]
StopPosition=7
ResponseEvent=1
[textdefault]
FontHeight=16
FontSpace=.7
text=M.D.                        
FontName=Georgia
IsTrueType=1
mainShxName=txt
subShxName=HZTXT

[MainAxisSpeed]
MainAxisDefaultIndex=0
[FileFormatCfg_ECP]
MaxCurveNumber=1500

[LayerManager]
HideNoOutputLayer=0
ApplyAllLayerAttrib=1
[FileFormatCfg_map]
MaxCurveNumber=1500
[TECHNICS_PENCUT]
CreateTechnicsCodeName=无名
TechnicsCfgType=0
PenCutCoordSysOID=0
PenCutOptimizePathType=1
PenCutInnerToOuter=1
PenCutDownToUpper=0
PenCutBlockHeight=150.000000
PenCutAutoSetPathDir=1
PenCutCicleMinSegNumber=36
PenCutDisperseLength=0.050000
PenCutCloseGapLength=0.000000
PenCutOverlapLength=0.000000
PenCutAdjustForClose=0
PenCutQXEnterLength=1.000000
PenCutDelayDownTime=0.000000
PenCutDelayUpTime=0.000000
PenCutOneAxisBackLashLength=0.000000
PenCutTwoAxisBackLashLength=0.000000
PenCutSpeed=75.000000
PenCutGWAcc=3000.000000
PenCutGWTime=0.010000
PenCutTrackSize=100
PenCutOffsetX=0.000000
PenCutOffsetY=0.000000
PenCutCtrolMode=0
PenCutCircleSpeedNum=0
[TECHNICS_KNIFECUT]
KnifeCutDownSpeed=20

[TechcisMode]
SupportMachineEngrave=0
[CreateTextCmd]
SupportReverse=0
Convert2Curve=1
[FileFormatCfg_dxf]
MaxCurveNumber=1500
[ArrayCopyCmd]
SupportSPath=1
CenterAlign=0
[DaHen]
NeedSetChangePower=0
StartPower=0
ChangePowerPoint=0
ChangeFrq=0
[AutoCalLeadInAndOutTrack]
AdjustStartPointToConner=0
MinInflectionAngle=45.000000
MinInflectionLength=20.000000
OverLapLength=0.000000
ReserveBlockType=1
MinInterDistance=1.000000
InLeadLineType=0
InLeadLineLength=2.500000
InLeadLineAngle=45.000000
OutLeadLineType=0
OutLeadLineLength=2.500000
OutLeadLineAngle=45.000000
AutoAdjustStartPos=1
AutoAdjustStartPosToMidLine=1
KnifeGapOffset=0.000000
OffsetType=1
GetDataByLayer=0
AutoCheckDataRight=0
AutoCheckIntersect=0
AutoCheckTimes=2
MaxLeadLineLen=10.0
[CreateGroupCmd]
ChangeToFirstLayer=1
[ImportFileAdjustData]
AdjustCircleMode=0
CircleRadius=5.0000000000
[HALF_BMP]
DotSize=1
ScanStep=0.01
[AddInOutLead]
UseLineConnect=0
LineConnectLength=0.0
LineConnectAngle=0.0
InType=0
InArcRadius=2.0
InLineLength=.5
InAngle=0.00
OutType=0
OutArcRadius=2.0
OutLineLength=.5
OutAngle=0.00
StartDir=1
OverLapLength=0.00
StartDirType=0
CloseType=0
Valid=0
[CreateLineCmd]
length=1
direct=0

syscfgRotary.ini

[Technics]
CreateTechnicsCodeNumber=6  
CreateTechnicsCodeDefaultMode=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_LINE=TECHNICS_UNKOWN
CreateTechnicsCodeDefaultMode_IMAGE=TECHNICS_UNKOWN
TechnicsDefaultType=0
CreateTechnicsCodeDefaultMode_16711680=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_0=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_255=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_33023=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_65280=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_32768=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_16776960=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615935=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_5987163=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_3421236=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_65535=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16636309=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_7697781=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_12615680=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_1048455=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_3499673=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8421376=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_10263708=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_4194368=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8388736=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8388863=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_5131854=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8323072=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_12615808=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_8421440=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8388672=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_10027161=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_32639=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_11974326=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_6842472=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8553090=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16751001=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_16751052=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_3394764=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_8421504=TECHNICS_LASERENGRAVE
CreateTechnicsCodeDefaultMode_11119017=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_2565927=TECHNICS_LASERCUT
CreateTechnicsCodeDefaultMode_9408399=TECHNICS_LASERCUT

[CreateTechnicsCode_0]
CreateTechnicsCodeName=TECHNICS_LASERCUT

[CreateTechnicsCode_1]
CreateTechnicsCodeName=TECHNICS_LASERENGRAVE

[CreateTechnicsCode_2]
CreateTechnicsCodeName=TECHNICS_LASERGRADEENGRAVE

[CreateTechnicsCode_3]
CreateTechnicsCodeName=TECHNICS_LASERHITPOINT

[CreateTechnicsCode_4]
CreateTechnicsCodeName=TECHNICS_PENCUT

[CreateTechnicsCode_5]
CreateTechnicsCodeName=TECHNICS_KNIFECUT

[CompanyInfo]
TelPhone=Telepnone:
SoftName=Lasercut5.3
CompanyName=G
Http=www...com
PrinterName=Lasercut(Leetro)

[ApplicationSetting]
OutPutWorkFile=1
FlashDelayTime=10
UserHighConfige=1
ShowDebugWndMsg=0
MainFaceType=0
Mpc05PortNumber=1
SelectOut=0
ShowHandle=1
BackColorRed=210
BackColorGreen=255
BackColorBlue=255
PromptRevise=0
OutputPLTPath=c:\Data.PLT
LaserCutForSteel=0
LimitWorkTimes=-1
HideChineseButton=0
TipPreWorkTime=0
EcYXAxisType=0
PrintMode=1

[IMPORTFILE]
PREFILEMODE=0
NeedSuckPoint=0
SuckPointTol=0.0
ShowMinPointSize=0.0
ShowMaxPointSize=100.0
CENTERDATA=1
UnitType=0
SysPointDefaultSize=1.0
SysDXFReadPointType=0
SysDXFMaxLength=2000
SysDXFMaxWidth=2000
SysDXFMaxHeight=100
DXFCalBasicPrecision=0.5
DXFNeedCalDataBound=0
MTextTrueTypeSpaceScale=0.25
MTextShxSpaceScale=0.35
AdjustDirect=0
clockwise=1
UseDifferentColor=1
InnerColor=8388863
OutColor=4227072

[MAPARRAY]
MoveData=1

[TableSetting]
TableGridWidth=50
TableGridHeight=50

[MotionCard_0]
MotionCard_Name=Step03Card

[Step03Card_0]
MotionCardName=Step-servo Co.,Ltd
ValidIOLevel=0  
ValidLimitLevel=0
LaserPowerMode=0  
LaserDefaultPulse=25000
AxisPulseOutputMode=0 
AxisPulseOutputLogic=0 
ChecHomeIOType=0
CardVer=LH
OpenCardTipMsg=0
GradeEngraveType=3
LaserMaxPower=100
CardMinVer=1
LaserPowerTableNumber=20
LaserPowerTable_0=0
LaserPowerTable_5=5
LaserPowerTable_10=10
LaserPowerTable_15=15
LaserPowerTable_20=20
LaserPowerTable_25=25
LaserPowerTable_30=30
LaserPowerTable_35=35
LaserPowerTable_40=40
LaserPowerTable_45=45
LaserPowerTable_50=50
LaserPowerTable_55=55
LaserPowerTable_60=60
LaserPowerTable_65=65
LaserPowerTable_70=70
LaserPowerTable_75=75
LaserPowerTable_80=80
LaserPowerTable_85=85
LaserPowerTable_90=90
LaserPowerTable_95=95
LaserPowerTable_100=100
LaserLowerPulse=1000
LaserLowerPower=0.1
LaserPowerRepairPower=0
TJCardNumber=1
TJCARD_NUMBER_0=41534552
YEncodeRate=10000.000000
YSpdIncrease=300.000000
XEncodeRate=10000.000000
XSpdIncrease=300.000000
YScaleCtrl=5.000000
YIntegralCtrl=0.011500
YDiffCtrl=0.002875
XScaleCtrl=5.000000
XIntegralCtrl=0.011500
XDiffCtrl=0.002875
YScaleCtrlii=5.000000
XScaleCtrlii=5.000000
YZero=0.000000
XZero=0.000000
YIntegralUpLev=100.000000
XIntegralUpLev=100.000000
DaLimY=0.500000
DaLimX=0.500000
WaterProtected=0
ZMoveType=0
CanContinueForEngrave=0
SaveBreakTime=0.1

[Step03LXCard_0]
MotionCardName=Step-servo Co.,Ltd
ValidIOLevel=0
ValidLimitLevel=0
LaserPowerMode=0  
LaserDefaultPulse=25000
AxisPulseOutputMode=1  
AxisPulseOutputLogic=0 
ChecHomeIOType=0
CardVer=LX
OpenCardTipMsg=0
GradeEngraveType=3
CardMinVer=1
LaserMaxPower=100
LaserPowerTableNumber=20
LaserPowerTable_0=0
LaserPowerTable_5=5
LaserPowerTable_10=10
LaserPowerTable_15=15
LaserPowerTable_20=20
LaserPowerTable_25=25
LaserPowerTable_30=30
LaserPowerTable_35=35
LaserPowerTable_40=40
LaserPowerTable_45=45
LaserPowerTable_50=50
LaserPowerTable_55=55
LaserPowerTable_60=60
LaserPowerTable_65=65
LaserPowerTable_70=70
LaserPowerTable_75=75
LaserPowerTable_80=80
LaserPowerTable_85=85
LaserPowerTable_90=90
LaserPowerTable_95=95
LaserPowerTable_100=100
LaserLowerPulse=0
LaserLowerPower=0
TestCardNumber=1
SupportArcMove=0
SupportBezierMove=0
ConAccStartSpeed=200.0
MaxTrackNumInBuffer=500
ChangLaserIONumber=0

[Setup]
ShortCutTip=LaserCut 5.3
ExecuteFileName = LaserCut53.exe
TipSetupChineseLanguage=1
SetUpType=0
AutoCADTip=AutoCAD
CoreDrawTip=CorelDraw
LaserCutTip=LaserCut53
InstallPath=C:\LaserCut53

[ONEAXIS_DEFAULT]
CoordSystem_Name=单轴
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OutputIOValue_1=-1
OutputIOValue_2=-1
SysAxisOID=1
OnePulseMoveLength=0.00078125
TableLength=150
TableMinPosition=0
TableMaxPosition=150
OriginDirector=-1
OriginPosition=0
GoOriginSpeed=2
OriginOffsetLen=1.5
NeedRevise=0
StartSpeed=0.5
WorkAcc=100
HandFastMoveSpeed = 15
HandSlowMoveSpeed = 1

[TWOAXIS_DEFAULT]
CoordSystem_Name=两轴
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OneAxisSysOID=0
TwoAxisSysOID=1
OneAxisOnePulseMoveLength=0.0072
TwoAxisOnePulseMoveLength=0.004843750000000
OneAxisTableLength=1000.000000
TwoAxisTableLength=600.000000
OneAxisTableMinPosition=0.000000
OneAxisTableMaxPosition=1000.000000
TwoAxisTableMinPosition=0.000000
TwoAxisTableMaxPosition=600.000000
OneAxisOriginDirector=-1
TwoAxisOriginDirector=1
OneAxisOriginPosition=0.000000
TwoAxisOriginPosition=600.000000
OneAxisGoOriginSpeed=15.000000
TwoAxisGoOriginSpeed=15.000000
NeedRevise=0
StartSpeed=10.000000
WorkAcc=1200.000000
SpaceSpeed=300.000000
ConstantSpeed=10.000000
HandFastMoveSpeed=200.000000
HandSlowMoveSpeed=50.000000
OneAxisBackLashLength=0.0
TwoAxisBackLashLength=0.0

[CoordSystem_0]
CoordSystem_Type=TWOAXIS

[CoordSystem_1]
CoordSystem_Type=ONEAXIS

[CoordSystem_2]
CoordSystem_Type=THREEAXIS

[TWOAXIS_0]
CoordSystem_Name=工作台
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
OneAxisSysOID=0
TwoAxisSysOID=1
OneAxisOnePulseMoveLength=0.007200000000000
TwoAxisOnePulseMoveLength=0.016200000000000
OneAxisTableLength=1200.000000
TwoAxisTableLength=2000.000000
OneAxisTableMinPosition=0.000000
OneAxisTableMaxPosition=1200.000000
TwoAxisTableMinPosition=0.000000
TwoAxisTableMaxPosition=2000.000000
OneAxisOriginDirector=1
TwoAxisOriginDirector=1
OneAxisOriginPosition=1200.000000
TwoAxisOriginPosition=1000.000000
OneAxisGoOriginSpeed=150.000000
TwoAxisGoOriginSpeed=150.000000
OneAxisOriginOffsetLen=5
TwoAxisOriginOffsetLen=5
NeedRevise=1
StartSpeed=5.000000
WorkAcc=500.000000
SpaceSpeed=150.000000
ConstantSpeed=8.000000
HandFastMoveSpeed=200.000000
HandSlowMoveSpeed=160.000000
OneAxisOverLapLength=0.000000
WorkAcc2=700.000000
SupportTwoXAxis=0
TwoXAxisOffsetY2=0
OneAxisOnePulseMoveLength2=0.00484375
TwoXAxisPulseMoveLen=0.0062320000
TwoXAxisReduceLen=70
ParkStartSpeedScale=1.0
ParkAccScale=1.0
ParkSpeedScale=1.0
WorkAccAcc=15000.000000
SpaceAccAcc=15000.000000
XAxisMaxChangeSpeed=10.000000
YAxisMaxChangeSpeed=10.000000
SupportTwoLaser=0
TwoLaserSpaceLength=0.000000

[ONEAXIS_1]
CoordSystem_Name=转料
SysOutputIOOID_1=-1
SysOutputIOOID_2=-1
SysAxisOID=2
OnePulseMoveLength=0.001250000000000
TableLength=380.000000
TableMinPosition=0.000000
TableMaxPosition=380.000000
OriginDirector=1
OriginPosition=380.000000
GoOriginSpeed=0.000000
OriginOffsetLen=7.500000
NeedRevise=0
WorkAcc=15.000000
HandFastMoveSpeed =15.000000
HandSlowMoveSpeed =10.000000
StartSpeed=5.000000
SpaceSpeed=10.000000
WorkAccAcc=20000.000000
SpaceAccAcc=80000.000000
AxisMaxChangeSpeed=30.000000

[HandMoveCoordSystem_DEFAULT]
HandMoveAxis1Increase=-1
HandMoveAxis1Reduce=-1
HandMoveAxis2Increase=-1
HandMoveAxis2Reduce=-1
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1
HandMoveSpeed=-1
HandMoveStepOrContinue=-1

[Technics_Laser_Data]
ExportRows=1
ExportColumns=1
ExportRowSpace=0.00000
ExportColumnSpace=0.00000
ExportRowCW=0.00000
ExportColumnCW=0.00000
DrawArrayDataType=1
LogicOrgPostionType=1
ArrayExportOrder=1
ArrayExportXOrder=1
ArrayExportYOrder=1
AtOnceExport=1
OutputTimes=1
DelayTime=0
FeedLength=0.000000
FeedSpeed=5.000000
MachineHasWorkMinute=9561
FeedDelayTime=0
ChangeSerialNo=0
OuputLayerOrderType=1
IsTwoLaserWorking=1

[LaserSimulateSpeedScale]
SimulateSpeedScaleNumber = 3
SimulateSpeed0_Min=0
SimulateSpeed0_Max=100
SimulateSpeed0_Scale=1
SimulateSpeed1_Min=100
SimulateSpeed1_Max=500
SimulateSpeed1_Scale=1
SimulateSpeed2_Min=500
SimulateSpeed2_Max=5000
SimulateSpeed2_Scale=1

[MACHINE_MODIFYCFG]
LASER_MODIFYCFG_SAVEPASSWORD=1
LASER_MODIFYCFG_PASSWORD=0

[RUNTIMECFG]
OneCoordSys_ONEAXIS_PULSE=1600
OneCoordSys_ONEAXIS_LENGTH=0.000000
TwoCoordSys_ONEAXIS_PULSE=5000
TwoCoordSys_ONEAXIS_LENGTH=36.000000
TwoCoordSys_TWOAXIS_PULSE=5000
TwoCoordSys_TWOAXIS_LENGTH=81.000000
IMPORTFILE_CENTERDATA=1
CombineLine_TOL=0.010000
SmoothLine_JB=0
AdjustStartPt=0
NeedPartWorkCtrol=0
StartWorkDelayTime=0
NeedControlMainAxis=0
OverWorkDelayTime=0
TwoCoordSys_TWOAXIS_PULSE2=6400
TwoCoordSys_TWOAXIS_LENGTH2=50

[ResourceManager]
CreateDefaultLanguageFile=0

[GEOMETRY]
SupportARC=0

[FileFormatCfg_dst]
MaxCurveNumber=1500
MustCloseBlock=1
SmoothTol=0.500000

[FileFormatCfg_plt]
MaxCurveNumber=1500
DrawPLTUnit=1016.000000

[FileFormatCfg_ai]
MaxCurveNumber=1400

[FileFormatCfg_eps]
MaxCurveNumber=1400

[FileFormatCfg_bmp]
MaxCurveNumber=1400

[Laser]
AutoSimulateSpeed=0

[DataCheck]
overlap=0
selfinter=1
close=1
intersection=0
overlaptol=0.01
lineinterTol=0
interwithleadline=1
CheckLayerCode=-1

[COREDRAW_CAD]
MustCalSecondFile=1

[OFFSETCFG]
OffsetDist=0.100000
OffsetType=0
OffsetTolerance=0.200000
MinPointNum=6
Offset=0
connect=1

[LASERCAD]
GetEntitiesType=0

[MachineControl]
MachineMotionCardNumber = 1
MachineAXISNumber = 3
MachineInputIONumber=17
MachineOutputIONumber=10
CoordSystemNumber =2
MainCoordSystemID = 0
FeedCoordSystemOID=1
TestMoveLength=50.000000
TestLaserPower=10.000000
StartCmdDoPause=0
MachineInputIODelay=3
ClickLaserTime=0.1
ApplicationLimitType=10
TestOpenLaserType=0
ThreadWorkMode=1
PerWorkTimesApplyHardHome=0
LoopAppylHomeType=1
AtOnceExport=0
ClipBoxPower=25.000000
ClipBoxOffsetLen=2.000000
ClipBoxSpeed=50.000000
RunBoxConnerAcc=100
NeedAlign=0
PerWorkMustGoLogicHome=1
AfterGoHomeToLogicHome=0
TestIsSlowSpeed=0
ClipBoxPower2=40.000000
RunMustDatum=0
AlignMachineZPos=0.000000
LogicOrgPositionX=663.322933
LogicOrgPositionY=435.327613
NeedOutput530=0
SupportSplitBlockOutPut=0
ZAxisForLaserFocus=0
FeedAxisGoHome=0
NeedContinueTipForBlock=0

[MotionAxis_0]
MotionCard_Index=0
MotionCard_axisOID=4

[MotionAxis_1]
MotionCard_Index=0
MotionCard_axisOID=3

[MotionAxis_2]
MotionCard_Index=0
MotionCard_axisOID=2

[MotionInputIO_0];X加
MotionCard_Index=0
MotionCard_InputIOOID=38

[MotionInputIO_1];X减
MotionCard_Index=0
MotionCard_InputIOOID=46

[MotionInputIO_2];Y加
MotionCard_Index=0
MotionCard_InputIOOID=40

[MotionInputIO_3];Y减
MotionCard_Index=0
MotionCard_InputIOOID=36

[MotionInputIO_4];开始
MotionCard_Index=0
MotionCard_InputIOOID=44

[MotionInputIO_5];暂停
MotionCard_Index=0
MotionCard_InputIOOID=8

[MotionInputIO_6];停止
MotionCard_Index=0
MotionCard_InputIOOID=12

[MotionInputIO_7];按键快慢
MotionCard_Index=0
MotionCard_InputIOOID=1

[MotionInputIO_8];步进/连续
MotionCard_Index=0
MotionCard_InputIOOID=1

[MotionInputIO_9];Z加
MotionCard_Index=0
MotionCard_InputIOOID=29

[MotionInputIO_10];Z减
MotionCard_Index=0
MotionCard_InputIOOID=31

[MotionInputIO_11];回原点
MotionCard_Index=0
MotionCard_InputIOOID=10

[MotionInputIO_12];走边框
MotionCard_Index=0
MotionCard_InputIOOID=42

[MotionInputIO_13];激光点射
MotionCard_Index=0
MotionCard_InputIOOID=27

[MotionInputIO_14];XYZ对刀
MotionCard_Index=0
MotionCard_InputIOOID=-1

[MotionInputIO_15];Z轴对刀
MotionCard_Index=0
MotionCard_InputIOOID=-1

[MotionInputIO_16];盖盖保护
MotionCard_Index=0
MotionCard_InputIOOID=-1

[HandMoveCoordSystem_0]
HandMoveAxis1Increase=0
HandMoveAxis1Reduce=1  
HandMoveAxis2Increase=2
HandMoveAxis2Reduce=3  
HandMoveSpeed=7      
HandMoveStepOrContinue=8 
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1

[HandMoveCoordSystem_1]
HandMoveAxis1Increase=9  
HandMoveAxis1Reduce=10    
HandMoveSpeed=7          
HandMoveStepOrContinue=8 
HandMoveAxis2Increase=-1
HandMoveAxis2Reduce=-1
HandMoveAxis3Increase=-1
HandMoveAxis3Reduce=-1

[MotionOutputIO_0];激光开关
MotionCard_Index=0
MotionCard_OutputIOOID=15

[MotionOutputIO_1];功率调整
MotionCard_Index=0
MotionCard_OutputIOOID=18

[MotionOutputIO_2];吹气信号
MotionCard_Index=0
MotionCard_OutputIOOID=150

[MotionOutputIO_3];正在加工,输出的信号
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_4];随动
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_5];工作台切换
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_6];
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_7];光闸
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_8];激光
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[MotionOutputIO_9]
MotionCard_Index=0
MotionCard_OutputIOOID=-1

[TECHNICS_LASERCUT]
CreateTechnicsCodeName=激光切割
TechnicsCfgType=0
LaserCutCoordSysOID=0
LaserCutConnerPower=60.000000
LaserCutWorkPower=100.000000
LaserCutFrequency=500
LaserCutOptimizePathType=1
LaserCutInnerToOuter=1
LaserCutDownToUpper=0
LaserCutBlockHeight=150.000000
LaserCutAutoSetPathDir=1
LaserCutCicleMinSegNumber=36
LaserCutDisperseLength=0.020000
LaserCutCloseGapLength=0.000000
LaserCutOverlapLength=0.000000
LaserCutAdjustForClose=1
LaserCutQXEnterLength=0.000000
LaserCutDelayMoveTime=0.000000
LaserCutOpenLaserDelayTime=0.000000
LaserCutCloseLaserDelayTime=0.000000
LaserCutOneAxisBackLashLength=0.000000
LaserCutTwoAxisBackLashLength=0.010000
LaserCutBlowGasType=2
LaserCutAheadBlowGasTimes=0.000000
LaserCutNoCloseGasTimes=0.000000
LaserCutSpeed=3.000000
LaserCutGWAcc=60.000000
LaserCutCircleSpeedNum=0
LaserCutCircleSpeed0_MinR=0.000000
LaserCutCircleSpeed0_MaxR=0.550000
LaserCutCircleSpeed0_Speed=10.000000
LaserCutCircleSpeed1_MinR=0.550000
LaserCutCircleSpeed1_MaxR=1.050000
LaserCutCircleSpeed1_Speed=15.000000
LaserCutCircleSpeed2_MinR=1.050000
LaserCutCircleSpeed2_MaxR=1.550000
LaserCutCircleSpeed2_Speed=25.000000
LaserCutCircleSpeed3_MinR=1.550000
LaserCutCircleSpeed3_MaxR=2.050000
LaserCutCircleSpeed3_Speed=30.000000
LaserCutCircleSpeed4_MinR=2.050000
LaserCutCircleSpeed4_MaxR=3.050000
LaserCutCircleSpeed4_Speed=35.000000
LaserCutCircleSpeed5_MinR=3.050000
LaserCutCircleSpeed5_MaxR=4.050000
LaserCutCircleSpeed5_Speed=40.000000
LaserCutGWTime=0.010000
LaserCutTrackSize=100
LaserCutMaxSpeed=400.000000
LaserCutConnerPower2=30.000000
LaserCutWorkPower2=50.000000
LaserCutInnerToOuter2=0
LaserCutStartPosType=0
LaserCutDelayTimeAfterCloseLaser=0.000000
LaserCutBackLashAddSpaceLength=8.000000
LaserCutLineLength=0.000000
SpaceCutLineLength=0.000000
bSpaceLineFirst=0
LaserCutAdjustMove=0
LaserCutAdjustMoveDelay=0.000000
LaserCutUpLen=0.000000
LaserCutDisperseMinLength=0.02
LaserCutOpenGZDelayTime=0.000000
LaserCutSpeedScale1=1.0
LaserCutSpeedScale2=1.0
LaserCutSpeedScale3=1.0
LaserCutSpeedScale4=1.0
LaserCutSpeedScale5=1.0
LaserCutSpeedScale6=1.0
LaserCutSpeedScale7=1.0
LaserCutSpeedScale8=1.0
AdjustStartPointToConner=0
SplitCircleForBY=0
AdjustMoveType=0
WaitInputIODelayTime=5
RepeatOpenLaserTimes=0
SupportAIOutput=0

[TECHNICS_LASERENGRAVE]
CreateTechnicsCodeName=激光雕刻
TechnicsCfgType=0   
LaserEngraveCoordSysOID=0
LaserEngravePower=100.000000
LaserEngraveFrequency=550
LaserEngraveSpeed=40.000000
LaserEngraveBlowGasType=1
LaserEngraveFillCircleR=2.500000
LaserEngraveFillCircleSpace=2.500000
LaserEngraveFillCircle=0
LaserEngraveTwoDirector=1
LaserEngraveScanStepLen=0.150000
LaserEngraveCfgNumber=5
LaserEngraveMinSpeed_0=0.000000
LaserEngraveMaxSpeed_0=250.000000
LaserEngraveBufferLen_0=25.000000
LaserEngraveChangeDirGap_0=-0.170000
LaserEngraveStartVel_0=45.000000
LaserEngraveAcc_0=6000.000000
LaserEngraveYSpeed_0=10.000000
LaserEngraveYAcc_0=100.000000
LaserEngraveSFOffsetX_0=0.085000
LaserEngraveSFOffsetY_0=0.000000
LaserEngraveExpandPenWidth=0
LaserEngraveExpandPenWidthScale=15.000000
LaserEngraveFillCircleType=0
LaserEngraveMaxSpeed=1000.000000
LaserEngravePower2=60.000000
LaserEngraveScanDirector=0
LaserEngraveMinSpeed_1=250.000000
LaserEngraveMaxSpeed_1=350.000000
LaserEngraveBufferLen_1=25.000000
LaserEngraveChangeDirGap_1=-0.200000
LaserEngraveStartVel_1=45.000000
LaserEngraveAcc_1=6000.000000
LaserEngraveYSpeed_1=10.000000
LaserEngraveYAcc_1=100.000000
LaserEngraveSFOffsetX_1=0.100000
LaserEngraveSFOffsetY_1=0.000000
LaserEngraveMinSpeed_2=350.000000
LaserEngraveMaxSpeed_2=450.000000
LaserEngraveBufferLen_2=25.000000
LaserEngraveChangeDirGap_2=-0.240000
LaserEngraveStartVel_2=45.000000
LaserEngraveAcc_2=6000.000000
LaserEngraveYSpeed_2=10.000000
LaserEngraveYAcc_2=100.000000
LaserEngraveSFOffsetX_2=0.120000
LaserEngraveSFOffsetY_2=0.000000
LaserEngraveMinSpeed_3=450.000000
LaserEngraveMaxSpeed_3=550.000000
LaserEngraveBufferLen_3=25.000000
LaserEngraveChangeDirGap_3=-0.270000
LaserEngraveStartVel_3=45.000000
LaserEngraveAcc_3=6000.000000
LaserEngraveYSpeed_3=10.000000
LaserEngraveYAcc_3=100.000000
LaserEngraveSFOffsetX_3=0.135000
LaserEngraveSFOffsetY_3=0.000000
LaserEngraveMinSpeed_4=550.000000
LaserEngraveMaxSpeed_4=1000.000000
LaserEngraveBufferLen_4=25.000000
LaserEngraveChangeDirGap_4=-0.300000
LaserEngraveStartVel_4=45.000000
LaserEngraveAcc_4=6000.000000
LaserEngraveYSpeed_4=10.000000
LaserEngraveYAcc_4=100.000000
LaserEngraveSFOffsetX_4=0.150000
LaserEngraveSFOffsetY_4=0.000000
LaserEngraveMinSpeed_5=550.000000
LaserEngraveMaxSpeed_5=650.000000
LaserEngraveBufferLen_5=25.000000
LaserEngraveChangeDirGap_5=0.000000
LaserEngraveStartVel_5=45.000000
LaserEngraveAcc_5=6000.000000
LaserEngraveYSpeed_5=10.000000
LaserEngraveYAcc_5=100.000000
LaserEngraveSFOffsetX_5=0.000000
LaserEngraveSFOffsetY_5=0.000000
LaserEngraveMinSpeed_6=650.000000
LaserEngraveMaxSpeed_6=750.000000
LaserEngraveBufferLen_6=25.000000
LaserEngraveChangeDirGap_6=0.000000
LaserEngraveStartVel_6=45.000000
LaserEngraveAcc_6=6000.000000
LaserEngraveYSpeed_6=10.000000
LaserEngraveYAcc_6=100.000000
LaserEngraveSFOffsetX_6=0.000000
LaserEngraveSFOffsetY_6=0.000000
LaserEngraveMinSpeed_7=750.000000
LaserEngraveMaxSpeed_7=850.000000
LaserEngraveBufferLen_7=25.000000
LaserEngraveChangeDirGap_7=0.000000
LaserEngraveStartVel_7=45.000000
LaserEngraveAcc_7=6000.000000
LaserEngraveYSpeed_7=10.000000
LaserEngraveYAcc_7=100.000000
LaserEngraveSFOffsetX_7=0.000000
LaserEngraveSFOffsetY_7=0.000000
LaserEngraveMinSpeed_8=850.000000
LaserEngraveMaxSpeed_8=1000.000000
LaserEngraveBufferLen_8=25.000000
LaserEngraveChangeDirGap_8=0.000000
LaserEngraveStartVel_8=45.000000
LaserEngraveAcc_8=6000.000000
LaserEngraveYSpeed_8=10.000000
LaserEngraveYAcc_8=100.000000
LaserEngraveSFOffsetX_8=0.000000
LaserEngraveSFOffsetY_8=0.000000

[TECHNICS_LASERHITPOINT]
CreateTechnicsCodeName=激光打孔
TechnicsCfgType=0
LaserHitPointCoordSysOID=0
LaserHitPointWorkPower=60.000000
LaserHitPointFrequency=20000
LaserHitPointOptimizePathType=1
LaserHitPointDownToUpper=0
LaserHitPointInnerToOuter=1
LaserHitPointBlockHeight=150.000000
LaserHitPointAutoSetPathDir=1
LaserHitPointDisperseLength=0.050000
LaserHitPointType=1
LaserHitPointGapLength=2.000000
LaserHitPointDelayTime=0.100000
LaserHitPointBlowGasType=1
LaserHitPointWorkPower2=50.000000
LaserHitPointStartPosType=0
LaserHitPointOpenLaserDelayTime=0.000000

[TECHNICS_LASERGRADEENGRAVE]
CreateTechnicsCodeName=激光坡度雕刻
TechnicsCfgType=0   
LaserGradeEngraveCoordSysOID=0
LaserGradeEngravePower=100.000000
LaserGradeEngraveStartPower=10.000000
LaserGradeEngraveFrequency=20000
LaserGradeEngraveSpeed=50.000000
LaserGradeEngraveBlowGasType=1
LaserGradeEngraveTwoDirector=1
LaserGradeEngraveScanStepLen=1.000000
LaserGradeEngraveGradeWidth=2.000000
LaserGradeEngraveGradeNumber=32
LaserGradeEngraveNeedRepairGrade=0
LaserGradeEngraveStartRepairGrade=0.200000
LaserGradeEngraveCfgNumber=5
LaserGradeEngraveMinSpeed_0=0.000000
LaserGradeEngraveMaxSpeed_0=150.000000
LaserGradeEngraveBufferLen_0=25.000000
LaserGradeEngraveChangeDirGap_0=0.000000
LaserGradeEngraveStartVel_0=45.000000
LaserGradeEngraveAcc_0=6000.000000
LaserGradeEngraveYSpeed_0=10.000000
LaserGradeEngraveYAcc_0=100.000000
LaserGradeEngraveSFOffsetX_0=0.000000
LaserGradeEngraveSFOffsetY_0=0.000000
LaserGradeEngraveMaxSpeed=1000.000000
LaserGradeEngraveScanDirector=0
LaserGradeEngraveMinSpeed_1=150.000000
LaserGradeEngraveMaxSpeed_1=250.000000
LaserGradeEngraveBufferLen_1=25.000000
LaserGradeEngraveChangeDirGap_1=0.000000
LaserGradeEngraveStartVel_1=45.000000
LaserGradeEngraveAcc_1=6000.000000
LaserGradeEngraveYSpeed_1=10.000000
LaserGradeEngraveYAcc_1=100.000000
LaserGradeEngraveSFOffsetX_1=0.000000
LaserGradeEngraveSFOffsetY_1=0.000000
LaserGradeEngraveMinSpeed_2=250.000000
LaserGradeEngraveMaxSpeed_2=350.000000
LaserGradeEngraveBufferLen_2=25.000000
LaserGradeEngraveChangeDirGap_2=0.000000
LaserGradeEngraveStartVel_2=45.000000
LaserGradeEngraveAcc_2=6000.000000
LaserGradeEngraveYSpeed_2=10.000000
LaserGradeEngraveYAcc_2=100.000000
LaserGradeEngraveSFOffsetX_2=0.000000
LaserGradeEngraveSFOffsetY_2=0.000000
LaserGradeEngraveMinSpeed_3=350.000000
LaserGradeEngraveMaxSpeed_3=450.000000
LaserGradeEngraveBufferLen_3=25.000000
LaserGradeEngraveChangeDirGap_3=0.000000
LaserGradeEngraveStartVel_3=45.000000
LaserGradeEngraveAcc_3=6000.000000
LaserGradeEngraveYSpeed_3=10.000000
LaserGradeEngraveYAcc_3=100.000000
LaserGradeEngraveSFOffsetX_3=0.000000
LaserGradeEngraveSFOffsetY_3=0.000000
LaserGradeEngraveMinSpeed_4=450.000000
LaserGradeEngraveMaxSpeed_4=550.000000
LaserGradeEngraveBufferLen_4=25.000000
LaserGradeEngraveChangeDirGap_4=0.000000
LaserGradeEngraveStartVel_4=45.000000
LaserGradeEngraveAcc_4=6000.000000
LaserGradeEngraveYSpeed_4=10.000000
LaserGradeEngraveYAcc_4=100.000000
LaserGradeEngraveSFOffsetX_4=0.000000
LaserGradeEngraveSFOffsetY_4=0.000000

[TechnicsOrign]
StopPosition=9
ResponseEvent=1
[textdefault]
FontHeight=10
FontSpace=.8
text=Out                    
FontName=Georgia
IsTrueType=1
mainShxName=txt
subShxName=NULL

[MainAxisSpeed]
MainAxisDefaultIndex=0
[FileFormatCfg_ECP]
MaxCurveNumber=1500

[LayerManager]
HideNoOutputLayer=0
ApplyAllLayerAttrib=1
[FileFormatCfg_map]
MaxCurveNumber=1500
[TECHNICS_PENCUT]
CreateTechnicsCodeName=无名
TechnicsCfgType=0
PenCutCoordSysOID=0
PenCutOptimizePathType=1
PenCutInnerToOuter=1
PenCutDownToUpper=0
PenCutBlockHeight=150.000000
PenCutAutoSetPathDir=1
PenCutCicleMinSegNumber=36
PenCutDisperseLength=0.050000
PenCutCloseGapLength=0.000000
PenCutOverlapLength=0.000000
PenCutAdjustForClose=0
PenCutQXEnterLength=1.000000
PenCutDelayDownTime=0.000000
PenCutDelayUpTime=0.000000
PenCutOneAxisBackLashLength=0.000000
PenCutTwoAxisBackLashLength=0.000000
PenCutSpeed=75.000000
PenCutGWAcc=3000.000000
PenCutGWTime=0.010000
PenCutTrackSize=100
PenCutOffsetX=0.000000
PenCutOffsetY=0.000000
PenCutCtrolMode=0
PenCutCircleSpeedNum=0
[TECHNICS_KNIFECUT]
KnifeCutDownSpeed=20

[TechcisMode]
SupportMachineEngrave=0
[CreateTextCmd]
SupportReverse=0
Convert2Curve=1
[FileFormatCfg_dxf]
MaxCurveNumber=1500
[ArrayCopyCmd]
SupportSPath=1
CenterAlign=0
[DaHen]
NeedSetChangePower=0
StartPower=0
ChangePowerPoint=0
ChangeFrq=0
[AutoCalLeadInAndOutTrack]
AdjustStartPointToConner=0
MinInflectionAngle=45.000000
MinInflectionLength=20.000000
OverLapLength=0.000000
ReserveBlockType=1
MinInterDistance=1.000000
InLeadLineType=0
InLeadLineLength=2.500000
InLeadLineAngle=45.000000
OutLeadLineType=0
OutLeadLineLength=2.500000
OutLeadLineAngle=45.000000
AutoAdjustStartPos=1
AutoAdjustStartPosToMidLine=1
KnifeGapOffset=0.000000
OffsetType=1
GetDataByLayer=0
AutoCheckDataRight=0
AutoCheckIntersect=0
AutoCheckTimes=2
MaxLeadLineLen=10.0
[CreateGroupCmd]
ChangeToFirstLayer=1
[ImportFileAdjustData]
AdjustCircleMode=0
CircleRadius=5.0000000000
[HALF_BMP]
DotSize=1
ScanStep=0.01
[AddInOutLead]
UseLineConnect=0
LineConnectLength=0.0
LineConnectAngle=0.0
InType=0
InArcRadius=2.0
InLineLength=.5
InAngle=0.00
OutType=0
OutArcRadius=2.0
OutLineLength=.5
OutAngle=0.00
StartDir=1
OverLapLength=0.00
StartDirType=0
CloseType=0
Valid=0
[CreateLineCmd]
length=1
direct=0