Bosch Miter Saw
| Bosch Miter Saw | |
|---|---|
| |
| Name | Bosch Miter Saw |
| Zone | Wood Shop
|
| Owner | i3Detroit |
| Make Model | GCM12SD |
| Part Number | |
| Date Acquired | 4/4/2026 |
| Storage Location | |
| Authorization Required | No |
| Status | Running |
| Value | 450
|
| Documentation | Operating Manual Link. https://www.boschtools.com/us/en/ocsmedia/2610051827_GCM12SD_0918.pdf |
| Other References | |
Intro
For sawing wood, plastics.
Max. Cut Capacity. - 0° Miter 0° Bevel 3-1/2 In. x 13-1/2 In. (4x14 Dimensional Lumber) Bevel Angle Range. 47° left and 47° right Bevel Stops .0°, 33.9°, 45° and 47° (L/R)
Rules
Use with wood only, please! Eye and ear Protection are required when operating the miter saw Don't wear gloves, loose clothing, jewelry, or any dangling objects when operating a miter saw. All guards must be in place and operating. If a guard seems slow to return to its normal position or hangs up, adjust it or repair it immediately. Unplug or lockout power to the miter saw when making repairs or adjusting blades and guards Hands and fingers must be kept clear of the blade by at least 6 in. Clean the lower guard frequently to help visibility and movement. To avoid losing control or placing hands in the blade path, hold or clamp all material securely against the fence when cutting. Never cut small pieces. Long material should be supported at the same height as the saw table. To avoid contact with a coasting blade, do not reach into the cutting area until the blade comes to a full stop. After completing a cut, release the trigger switch and allow the blade to come to a complete stop, then raise the blade from the workpiece. If the moving blade stays in the cutting area after the cutting is complete, injury can result from accidental contact.
Instructions
Maintenance Info
ShopVac dust collector needs emptying periodically.
FAQ
ToDo