Manual Impulse Sealer
| Manual Impulse Sealer | |
|---|---|
| |
| Name | Plastic Bag Sealer |
| Zone | Electronics Lab
|
| Owner | i3Detroit |
| Make Model | Manual Impulse Sealer MSP-200 |
| Part Number | |
| Date Acquired | |
| Storage Location | Middle shelf, in a yellow and black box |
| Authorization Required | No |
| Status | Running |
| Value |
|
| Documentation | |
| Other References | |
Intro
This devices uses heat to seal plastic bags
Rules
- Always keep sealing platform clean. Residue will reduce the life of the components
- Never use moisture to clean sealing surface
- Replace teflon strip when torn, or when changing heating element
- Unplug machine when servicing or not in use
Instructions
- Plug in device. Sealer only operates when arm is depressed
- Set dial to regulate timer. Thicker plastic needs longer to seal.
- Place bag over lower element
- Bring handle down until light turns on
- Wait 1 second after light turns off to release.
- Increase dial if seal is not complete. Decrease dial if plastic is burning
Maintenance Info
- Clean heating surface of plastic residue when you are finished
