View source for 3D Printer - Prusa MK3S

{{Equipment
|Name=petrucci
|Zone=Fab Lab
|LooksLike=3dpetrucci.jpg
|Owner=i3Detroit
|MakeModel=Prusa i3
|PartNumber=MK3S
|Date=2020-10-26
|DateDeparted=2022-12-06
|StorageLocation=Eventually, north bench
|Authorization Required=No
|Status=Departed
|Value=1122.32
|MACaddress=b8:27:eb:8f:fb:87
|Hostname=petrucci.i3detroit.local
|PowerRequirements=120VAC, 3.6A
|Documentation=[https://github.com/ultimachine/Einsy-Rambo/blob/1.1a/board/Project%20Outputs/Schematic%20Prints_Einsy%20Rambo_1.1a.PDF Einsy Rambo schematic]
|IPaddress=10.13.0.60
}}
== OctoPrint Setup ==

=== Materials ===
* Raspberry Pi 3
* Raspberry Pi Camera
* [https://www.pololu.com/product/2851 Pololu 2581] 24V to 5V 5A step-down
* [https://www.argon40.com/argon-fan-hat-for-raspberry-pi-4-raspberry-pi-3b-and-raspberry-pi-3-b.html Argon Fan HAT]
* [https://smile.amazon.com/dp/B06XWFG7Q7 Generic heatsinks], bonded with [https://www.mgchemicals.com/products/adhesives/thermally-conductive-adhesives/thermal-adhesive-high-tc/ MG Chemicals thermal epoxy]

=== Add ons ===
* [https://www.thingiverse.com/thing:3032150 Camera bed mount]
* [https://www.thingiverse.com/thing:3446992 Modified Einsy case]
* [https://www.thingiverse.com/thing:3102051 Pi camera cable clips]
* [https://www.thingiverse.com/thing:2562582 Z axis motor covers]

=== Wiring ===
[[File:octoprint_wiring.png|300px]]
[[File:octoprint_wired.jpg|300px]]