|Remember to always; clean up and return the equipment to a fully functional, safe state before you leave. This includes returning any safety mechanisms to fully working order.|
A custom built vacuum former. Built at I3Detroit
- Ownership: John Sugg less than 100%, Brian Wennberg less than 100%, Glen Moore, Rocco Marras
- Location: Between the Bike Shop and the Vinyl Shop
- What it looks like:
- Make/Model: Proto Form. Plans-built Vacuum Former
- Part Number: J
Do not turn vac pump off during operation or vac pump could be damaged. Do not use a buck with hollow bottom surface or platen could be damaged.
Training is required before using. Contact John Sugg to set up a training time. Sugg3d@comcast.net
While it is simple to operate, this tool can be damaged if not used properly. Please get training before using. John has stocked 2x2 styrene sheets (white or black) for you to buy. Place $3.00 in blue cash box for each sheet you use. The Vacuum Former can be converted to 2x3 if you wish to make larger parts.
Report any problems to email@example.com
Things that Need to be Done
What problems does this thing have, or are there improvements that would make it better.
A list of commonly asked questions