Difference between revisions of "Laser Cutter - Full Spectrum"

From i3Detroit
Jump to: navigation, search
(added repair note)
(Updated documentation, added training tables)
Line 1: Line 1:
 
{{Equipment  
 
{{Equipment  
  
| Name = 40W Laser CUtter
+
| Name = 40W Laser Cutter
  
 
| Owner = i3 (100%)
 
| Owner = i3 (100%)
Line 7: Line 7:
 
| StorageLocation = North Wall of the Fab Lab
 
| StorageLocation = North Wall of the Fab Lab
  
| MakeModel = Full Spectrum Laser HL40-5g Hobby Advanced Laser
+
| MakeModel = Full Spectrum Laser
  
| PartNumber = N/A
+
| PartNumber = HL40-5g Hobby Advanced Laser
  
 
| Documentation = Owner's Manual black binder on shelf above laser cutter
 
| Documentation = Owner's Manual black binder on shelf above laser cutter
Line 25: Line 25:
  
 
| OtherReferences =
 
| OtherReferences =
 
  
 
| MaintenanceInfo =
 
| MaintenanceInfo =
  
| RepairNeeded = The ventilation system must be overhauled so there is enough air movement. This should not be used until that time.
+
| RepairNeeded = The axes are slightly non-square. A focus block needs to be manufactured, 1.359" long by nominally 0.5"-0.75" diameter, solid, thermally stable material like aluminum.
  
 
| ToDos =
 
| ToDos =
  
 +
*The axes are slightly non-square.
 +
*A focus block needs to be manufactured
 +
**1.359" long by nominally 0.5"-0.75" diameter
 +
**solid, thermally stable material like aluminum or steel
 +
*The focus slide could be redesigned for less flex.
 +
*Payment counter?
 +
*Quieter air compressor
  
 
| FAQs =
 
| FAQs =
  
 
}}
 
}}
 +
 +
== Trainers and Trained Personnel ==
 +
 +
{| class="wikitable"
 +
|+ Trainers, certified to train others
 +
! Name
 +
! Certified By
 +
|-
 +
| [[User:Agmlego|Andrew Meyer]] || N/A
 +
|-
 +
| [[User:mjgardes|Matt Gardeski]]  || N/A
 +
|}
 +
 +
{| class="wikitable"
 +
|+ Trained, certified to operate machine
 +
! Name
 +
! Trained By
 +
|-
 +
|}
 +
 
[[Category:Fab Lab]]
 
[[Category:Fab Lab]]

Revision as of 09:50, 27 September 2013



40W Laser Cutter

Basic Info

  • Ownership: i3 (100%)
  • Location: North Wall of the Fab Lab
  • What it looks like:
Full Spectrum Laser

Manufacturer Information

  • Make/Model: Full Spectrum Laser
  • Part Number: HL40-5g Hobby Advanced Laser

Documentation

Owner's Manual black binder on shelf above laser cutter

Rules

  • Please get training before use.
  • Please donate $0.25/min of cut time

Instructions

Owner's Manual black binder on shelf above laser cutter

Other References

Maintenance

Things that Need to be Done

  • The axes are slightly non-square.
  • A focus block needs to be manufactured
    • 1.359" long by nominally 0.5"-0.75" diameter
    • solid, thermally stable material like aluminum or steel
  • The focus slide could be redesigned for less flex.
  • Payment counter?
  • Quieter air compressor

FAQs


Trainers and Trained Personnel

Trainers, certified to train others
Name Certified By
Andrew Meyer N/A
Matt Gardeski N/A
Trained, certified to operate machine
Name Trained By