Difference between revisions of "Jointer"

From i3Detroit
Jump to: navigation, search
(Update + photo for the new jointer.)
(Minor updates)
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
{{Ambox
 +
|nocat=true
 +
| type  = delete
 +
| text  = Under no circumstances should non-natural materials be used on the jointer. This includes; '''masonite, particle board, or various other man-made materials'''. Using these on the jointer will dull it very quickly.
 +
}}
 
{{Equipment  
 
{{Equipment  
 
| Name = Jointer
 
| Name = Jointer
| Intro = The jointer in the Wood Shop is currently being set up.  
+
| Intro = A jointer is used to create a straight surface on a wooden board.  
| Owner = TBD, best contact person is Dave Alvarez
+
| Owner = TBD, best contact persons are Greg Smith or Dave Scholl
| StorageLocation = The jointer should be stored in the wood shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.
+
| StorageLocation = The jointer should be stored in the Wood Shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.
| MakeModel = Acme CNC Yak Shaver - Model 5000 deluxe
+
| MakeModel = Chiu Ting WJT-150 (6 inch jointer)
| PartNumber =  
+
| PartNumber = S/N 4932
| Documents = Link(s) to on-line documentation
+
| Documentation =  
 +
* Wikipedia has an excellent article on the [http://en.wikipedia.org/wiki/Jointer Jointer].
 +
* An online video that discusses [http://youtu.be/gO746cuRqV4 jointer table/cutter alignment  ]
 +
 
 
| LooksLike = [[File:jointer.jpg|jointer photo]]
 
| LooksLike = [[File:jointer.jpg|jointer photo]]
 
| Rules =
 
| Rules =
Put the rules that govern the use of this tool here.
+
* To prevent nicks on the blades, please check your board carefully and remove nails, screws, and any other metal bits.
* You can use any wiki formatting that you wish:
+
* Work with pure wood only, please! Masonite, for example, will quickly dull the blades. Even plywood, particleboard, MDF, and the like will shorten the blade life because of the glue content.
* Like a bulleted list
+
 
| Instructions =
 
| Instructions =
 
====Set the cutting depth====
 
====Set the cutting depth====
 
The depth adjustment ...
 
The depth adjustment ...
 
====Turn it On====
 
====Turn it On====
The power switch is located ...
+
The power switch is located on the front of the base.
 
====Turn it Off====
 
====Turn it Off====
The power switch is located ...
+
The power switch is located on the front of the base.
 
| MaintenanceInfo =
 
| MaintenanceInfo =
Does this thing need it's oil changed every 30 cycles?
+
Two critical adjustments need to be maintained on the jointer. The infeed and outfeed tables need to be parallel to within 0.001 in. or so, and the blades need to be 0.001 in. higher than the outfeed table.
People need to know!
+
 
| ToDos =  
 
| ToDos =  
What problems does this thing have, or are there improvements that would make it better.
+
* The sawdust chute dumps directly onto the floor. Perhaps a box or a dust collection hose would make cleanup more convenient.
 
| FAQs =
 
| FAQs =
# What is a jointer? Wikipedia has an excellent article on the [http://en.wikipedia.org/wiki/Jointer Jointer].
 
 
}}
 
}}
 +
[[Category:Wood Shop]]

Revision as of 18:29, 18 November 2012



Jointer

A jointer is used to create a straight surface on a wooden board.

Basic Info

  • Ownership: TBD, best contact persons are Greg Smith or Dave Scholl
  • Location: The jointer should be stored in the Wood Shop. It is on a wheeled base so it can be rolled out to provide clearance for working with long boards.
  • What it looks like:

jointer photo

Manufacturer Information

  • Make/Model: Chiu Ting WJT-150 (6 inch jointer)
  • Part Number: S/N 4932

Documentation

Rules

  • To prevent nicks on the blades, please check your board carefully and remove nails, screws, and any other metal bits.
  • Work with pure wood only, please! Masonite, for example, will quickly dull the blades. Even plywood, particleboard, MDF, and the like will shorten the blade life because of the glue content.

Instructions

Set the cutting depth

The depth adjustment ...

Turn it On

The power switch is located on the front of the base.

Turn it Off

The power switch is located on the front of the base.

Other References

not specified

Maintenance

Two critical adjustments need to be maintained on the jointer. The infeed and outfeed tables need to be parallel to within 0.001 in. or so, and the blades need to be 0.001 in. higher than the outfeed table.

Things that Need to be Done

  • The sawdust chute dumps directly onto the floor. Perhaps a box or a dust collection hose would make cleanup more convenient.

FAQs