Jet Drill Press

From i3Detroit
Revision as of 06:11, 22 February 2013 by Djscholl (Talk | contribs)

Jump to: navigation, search



Jet Drill Press

It is most often used for drilling holes in wood, plastic, and related materials. With specialized bits, it can also be used for sanding.

Basic Info

  • Ownership: Dave Scholl
  • Location: In the wood shop on a rolling cart.
  • What it looks like:

Jet drill press photo

Manufacturer Information

  • Make/Model: Jet JDP-15M
  • Part Number: Stock No. 354165, Serial No. 7090087

Documentation

Rules

  • Please wear safety glasses!
  • Please clamp your work to the drill press table.
  • Before you drill, check to make sure your bit is located over the hole in the table. When the table is raised or lowered, it can swing a little bit to the side. If the hole is not aligned under the bit, when the drill goes through the workpiece it will make another divot like the one you can see on the table now.

Instructions

  • The chuck key is on a retractable chain on the right-hand side, next to the motor.
  • Drill press clamps and the drill press vise are kept in the cart under the drill press.

Other References

TBD

Maintenance

TBD

Things that Need to be Done

  • Build Cabinet for Drill Press tools and accessories

FAQs

TBD