Difference between revisions of "HOWTO Program a key"

From i3Detroit
Jump to: navigation, search
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
# Collect a $5 key deposit and drop it in the treasurer's drop box
 
# Collect a $5 key deposit and drop it in the treasurer's drop box
 
# Make sure you have an unassigned key (fob or card) to use.
 
# Make sure you have an unassigned key (fob or card) to use.
# Make sure you have the master key tracker, a pink page (currently in nate<sub>1</sub>'s possession) with all the keys recorded on it.
 
 
# Go to the keypad, and make sure it's at the ready screen. (i.e. not waiting for a PIN after a swipe, or otherwise distracted.)
 
# Go to the keypad, and make sure it's at the ready screen. (i.e. not waiting for a PIN after a swipe, or otherwise distracted.)
 
# Enter the super-secret programming code, starting with * and finishing with #.
 
# Enter the super-secret programming code, starting with * and finishing with #.
# Go to ... aww dammit I'll finish this later. FIXME!
+
# Go to Add/Delete and hit # to select
 +
# Select "Add by ID" and arrow up/down until you find an open slot (the serial on the bottom will show 00000:00000)
 +
# Write the slot number down.
 +
# Hit * to go back to the menu and select "Add by RF Learn"
 +
# Tag units: 1 (if you have multiple people to add, do the entire procedure separately for them.)
 +
# Close tag into RF area: Wave the unassigned key near the reader. It should pick it up.
 +
# Close the tag into the RF area again, and it will show the key's serial number.  Write it down.
 +
# Now, hit # until you are at the main menu and select "User Settings"
 +
# Access mode 3: Card and pin
 +
# Careful! It just auto-advanced to the next slot. Back it up so you're working on the slot you just added someone to.
 +
# Now, change PIN
 +
# Let the new member enter their own PIN, 4 digits, don't press anything afterward.
 +
# If it says Success!, you're done. Back out and try the new key.
 +
 
 +
Any failures, call.... whom? I'll volunteer: Nate B, 248-379-3614.
 +
 
 +
[[Category:HOWTO]][[Category:Internal HOWTO]]

Latest revision as of 17:39, 10 August 2012

  1. Collect a $5 key deposit and drop it in the treasurer's drop box
  2. Make sure you have an unassigned key (fob or card) to use.
  3. Go to the keypad, and make sure it's at the ready screen. (i.e. not waiting for a PIN after a swipe, or otherwise distracted.)
  4. Enter the super-secret programming code, starting with * and finishing with #.
  5. Go to Add/Delete and hit # to select
  6. Select "Add by ID" and arrow up/down until you find an open slot (the serial on the bottom will show 00000:00000)
  7. Write the slot number down.
  8. Hit * to go back to the menu and select "Add by RF Learn"
  9. Tag units: 1 (if you have multiple people to add, do the entire procedure separately for them.)
  10. Close tag into RF area: Wave the unassigned key near the reader. It should pick it up.
  11. Close the tag into the RF area again, and it will show the key's serial number. Write it down.
  12. Now, hit # until you are at the main menu and select "User Settings"
  13. Access mode 3: Card and pin
  14. Careful! It just auto-advanced to the next slot. Back it up so you're working on the slot you just added someone to.
  15. Now, change PIN
  16. Let the new member enter their own PIN, 4 digits, don't press anything afterward.
  17. If it says Success!, you're done. Back out and try the new key.

Any failures, call.... whom? I'll volunteer: Nate B, 248-379-3614.