ChromoDisk

From i3Detroit
Revision as of 03:03, 24 November 2011 by Surferdudemi (Talk | contribs)

Jump to: navigation, search

The ChromoDisk aka ColorMesh

... is a round PC board with 9 rings of 18 RGB LEDs each. The microcontroller and other components that make it work are in the center. The design is based upon the [Aurora Instructable]. Since I've worked with AVRs, and this seems like an interesting introduction to PCB design with LEDs, I decided to redo the original to fit into a 100mm dia board for minimum cost. I also designed it for a AA battery pack on the back side of the board. We'll see how long it lasts with 162 LEDs!

Current status: Version 2 boards are on their way! Two samples using the version 1 prototype are done (5 hours to assemble!), writing software for it. Here's a demo of a simple program I wrote:

Demo of prototype

File:Chromodisk1.sch

File:Chromodisk1.brd

File:ColorTest1.asm

File:ColorMesh.asm

Notes on Improvements:

  1. Improve power distribution. RESET pull-up is at the end of the line.
  2. Polarity of battery holder is reversed.
  3. Add ground plane.
  4. Pull-up on SCLK line affects programming.
  5. Need to current-limit base drive on Q1-Q9, else overheats CPU.
  6. Add 220uF cap to power supply to avoid programming problems.